Contents:
This section provides information on installing and running SBC SWe Lite on VMware ESXi. Perform the steps in Downloading the SBC SWe Lite Package before performing this procedure. If there is a need to access the ESXi server remotely, download and install vSphere Client to the desktop. From the VMware ESXi Welcome page, click Download vSphere Client for Windows. Download vSphere Client After installing, login to the vSphere Client using the appropriate login credentials. Logon to VMware vSphere Identify and reserve two static IP addresses for the Management and Media ports prior to creating the virtual SBC SWe Lite. One IP address is required for the Management port, and one for the Media port. In the examples below, the Management Port is on the 10.56.230.x subnet and the Media Port is on the 10.56.227.x subnet. Prerequisites
Install vSphere
Install the VMware vSphere Client
If there is a need to access the ESXi server remotely, download and install vSphere Client to the desktop.
From the VMware ESXi Welcome page, click Download vSphere Client for Windows.
Download vSphere Client
After installing, login to the vSphere Client using the appropriate login credentials.
Logon to VMware vSphere
Identify and reserve two static IP addresses for the Management and Media ports prior to creating the virtual SBC SWe Lite.
Enter the ESXi server IP address into a browser address bar to login.
After logging on to the ESXi server, select Deploy OVF Template from the File drop-down list.
Select the location of the OVF package, and then click Next.
OVF Template Location
When the OVF Template Details pane opens, make note of the information listed and then click Next.
OVF Template Details
When the Name and Location pane opens, rename the SBC SWe Lite instance to make it unique in the inventory folder, and then click Next.
Rename the File
Select the Resource Pool to deploy the template, and then click Next.
Select Resource Pool
Ensure that the Thick Provision Lazy Zeroed option is selected in the Disk Format dialog box, and then click Next.
Disk Format
Review the Network Mapping dialog box. If necessary, select a different media port network interface from the Destination Networks drop-down list, and then click Next.
Network Mapping
Make note of the deployment settings, and then click Finish to start the deployment task.
Ready to Complete
Sonus recommends that all customers review and, if necessary, optimize their Network Interface configurations before proceeding. Failure to do so could lead to interface mapping issues. See Mapping Network Interfaces and then return to this section.
Select the newly-created SBC SWe Lite from the list in the left pane.
In MAC Address section of the right window pane, select Manual.
Finish configuring the static MAC address provided by your Network IT Administrator.
Repeat for the remaining four Network adapters (2 -5).
Configure Network Adapter 1
Configure at least two network interfaces for the appropriate network.
Click OK to save and then exit the Settings window.
Power on the SBC SWe Lite by selecting Power on the virtual machine link on the Getting Started tab.
Power on Virtual Machine
Click the Console tab.
If needed, perform the following steps to delete a VM instance from the server.
Step | Action |
---|---|
1 | Enter the ESXi server IP address into a browser address bar to login. |
2 | Exit the instance. |
3 | Select the instance and click Delete from Disk. Figure : Delete from Disk
|
3 | Click Delete from Disk. Note: Do not select Remove from Inventory. Doing so could impact other VM instances on the server. |
Proceed to SBC SWe Lite Initial Setup. After setup is complete, proceed to License Installation.
If you are installing an SBC SWe Lite for a trial or demonstration deployment, proceed to Obtaining and Installing a SWe Lite Trial License.