Page History

This section provides information on installing and running

Prerequisites

Install vSphere

Install the VMware vSphere Client

 If there is a need to access the ESXi server remotely, download and install vSphere Client to the desktop.

1. From the VMware ESXi Welcome page, click Download vSphere Client for Windows.

   Caption
   0 Figure 1 Download vSphere Client 3 Download vSphere Client
   Image Modified

   
   

2. After installing, login to the vSphere Client using the appropriate login credentials.

   Caption
   0 Figure 1 Logon to VMware vSphere 3 Logon to VMware vSphere
   Image Modified

3. Identify and reserve two static IP addresses prior to creating the virtual

   Spacevars
   0 series3

   .

   Note
   icon false title Note
   One IP address each is required for the management port and media portManagement Port, and one for the Media Port. In the examples below, the management port Management Port is on the 10.56.230.x subnet and the media port Media Port is on the 10.56.227.x subnet.

Install SBC SWe Lite on the ESXi Server

1. Enter the ESXi server IP address into a browser address bar to login. Caption

   0	Figure
   1	ESXi IP Address
   3	ESXi IP Address

   Image Removed

2. After landing logging on to the ESXi server, select Deploy OVF Template from the File drop-down menu. Caption

   0	Figure
   1	Deploying OVF Template
   3	Deploying OVF Template

   Image Removedlist.

3. Select the location of the OVF package, and then click Next.

   Caption
   0 Figure 1 OVF Template Location 3 OVF Template Location
   Image RemovedImage Added

4. The When the OVF Template Details screen displays. Make pane opens, make note of the information listed and then click Next.

   Caption
   0 Figure 1 OVF Template Details 3 OVF Template Details

5. The When the Name and Location screen displays. Rename pane opens, rename the

   Spacevars
   0 series3

    instance to make it unique in the inventory folder, and then click Next.

   Caption
   0 Figure 1 Rename the File 3 Rename the File
   Image RemovedImage Added

6. Select the Resource Pool to deploy the template, and then click Next.

   Caption
   0 Figure 1 Select Resource Pool 3 Select Resource Pool
   Image RemovedImage Added

7. Ensure that the Thick Provision Lazy Zeroed option is selected on in the Disk Format screen dialog box, and then click Next.

   Caption
   0 Figure 1 Disk Format 3 Disk Format
   Image Modified

8. On Review the Network Mapping screen, if required dialog box. If necessary, select a different media port network interface from the Destination Networks drop-down menulist, and then click Next.

   Caption
   0 Figure 1 Network Mapping 3 Network Mapping
   Image Modified

9. Make note of the deployment settings, and then click Finish to create the

   Spacevars
   0 series3

   start the deployment task.

   Caption
   0 Figure 1 Ready to Complete 3 Ready to Complete
   Image RemovedImage Added

Edit the Virtual Machine Settings

1. Select the newly-created 

   Spacevars
   0 series3

   from the list in the left window pane as shown below.

Select the Edit virtual machine settings link on the Getting Started tab.

1. Caption
   0 Figure 1 Edit Virtual Machine Settings 3 Edit Virtual Machine Settings
   Image Removed

   From the Hardware tab, select Memory from the left panel.

2. From the Memory Configuration panel, modify the memory size if required by clicking the arrows in the Memory Size field and then click OK.

   Note

   icon	false
   title	Note

    The default memory size is 1 GB. Memory size can be increased to more than 1GB if desired.

Configuring Virtual Network Adapters

1. Select Network adapter 1 from the Hardware tab of Virtual Machine Properties.

2. In MAC Address section of the right window pane, select Manual. Default is Automatic.

   Note
   icon false title Note
   The MAC address field is populated with the first three octets.

3. Finish configuring the static MAC address based upon local requirementsprovided by your Network IT Administrator.

4. Repeat steps 5 through 7 for the remaining four Network adapters (2 -5).

   Caption
   0 Figure 1 Configure Network Adapter 1
   Image AddedImage Removed

5. Configure at least two network interfaces for the appropriate network.

6. Click OK to save and then exit the Settings window.

   Caption

   0	Figure
   1	Configure at least two network interfaces

   Image Removed 

7. Power on the

   Spacevars
   0 series3

    by selecting Power on the virtual machine link on the Getting Started tab.

   Caption
   0 Figure 1 Power on Virtual Machine 3 Power on Virtual Machine
   Image Modified

8. Click the Console tab, and wait for the login prompt (press enter a few times if nothing appears).
   

   Caption
   0 Figure 1 Configuration 3 Configuration
   Image Removed

   Note
   icon false title Note
   To Access the SBC SWe Lite virtual machine, you need to further configure the network interfaces from the virtual machine console.

9. Login as user netconfig and password Config!, this automatically launches the interface mapping shell script.

10. User is prompted to change the netconfig password. The password requirement is six characters with a combination of upper and lower case letters, numbers, and other characters.

    Caption
    0 Figure 1 Netconfig 3 Netconfig
    Image Removed

11. Enter the admin interface name and Ethernet 1 media interface name as indicated below.

    NoteiconfalsetitleNote

    The interface mapping shell script prompts the user to provide the Interface name to map to the Ethernet Interface that will show in the WebUI.  In order to correctly map the Interface, the MAC address gathered from the virtual machine editing session performed earlier in this procedure is required. Entering the interface name and MAC address mapping activates the interface, otherwise by just pressing Enter, the interface will not be specified and it will not show on the WebUI.

    Caption
    0 Figure 1 Interface Mapping 3 Interface Mapping
    Image Removed

12. Verify the admin port is connected to a network that has DHCP enabled.

    Note
    icon false title Note
    If the network mapping and the connection are correct, the admin IP address should show on the console port as shown below. If the Admin IP address is not present, check your connections and mappings.

    Caption
    0 Figure 1 Admin IP Address 3 Admin IP Address
    Image Removed

13. If access to the root of the console is required before the WebUI initial setup, the login is root and the default password is chorus.

    Caption
    0 Figure 1 Login to Root 3 Login to Root
    Image Removed

Complete Initial Setup

Verify/change information on the Initial Sonus SBC Setup window as required, and click OK.

Complete Initial Setup

Proceed to SBC SWe Lite Initial Setup.