1. Choose VoIP > SIP > SIP UA > Distinctive Ring.

  2. Configure settings using the information in the following table as a guide.

    FXS/Phone Port Distinctive Ring Configuration Parameters

    ItemDescription

    Distinctive Ring Rules

    Manages the distinctive ring list.

    Add a Distinctive Ring Rule

    Configures distinctive rings for FXS/Phone ports. Distinctive ring rules are applied in the order in which they are defined. If a rule matches, the ring pattern defined for the rule is used to ring analog phones on the FXS/phone port.

    Note: You cannot change the order in which rules are applied. If the order is not as desired, you must delete or redefine the existing rules.

    Tip: Rules can include a mix of the digits and patterns listed in the following sections:

    Ring Pattern Rules

    • Caller and Called Number Patterns

    ActionAdds or edits a rule. To add a new rule, choose Add new rule from the Action drop-down list.
    Caller Pattern MatchEnter a caller pattern that triggers the distinctive ring.

    Called Pattern Match

    Enter a pattern in the one or both of the following fields:

    Caller Pattern-match

    Called Pattern-match

    Ring Type

    Choose a ring type from the Ring Type drop-down list:

     Ring-0 (default)

     Ring-1

     Ring-2

     Ring-3

     Ring-4

  3. Click Add. The new entry is added to the Distinctive Ring Rules table.

  4. Click Submit All to save your settings to the EdgeMarc.

  5. A message indicates that service will be temporarily interrupted. Click OK to confirm.