The SBC interface includes an Easy Configuration wizard, which enables end-users to quickly deploy SBC and Skype for Business/Lync, as well as SIP with IP Phones. Based on a template, you can configure items including endpoint (define user and provider), routing (routing configuration applied to scenario), and country (tone table parameters and emergency numbers for a particular country). Through this method, you can easily configure the SBC according to your topology.
The wizard produces different configuration options depending on the desired deployment:
- SIP ↔ Microsoft UC
- SIP ↔ ISDN PBX
- SIP ↔ IP Phones
- ISDN PSTN ↔ Microsoft UC
- FXO ↔ Microsoft UC
Use the Easy Configuration Wizard
If the Easy Configuration Wizard is run a second time, it will always create new configuration elements for the scenario being set up. Updates will not be made to the previous configured items.
The Easy Configuration Wizard is available through the following two methods:
Run using Initial Setup
Access the Easy Configuration wizard during during Initial Setup:
- Configure the desired fields. See SBC SWe Lite Initial Setup, Sonus SBC 2000 - Initial Setup or Sonus SBC 1000 - Initial Setup.
- From the Easy Setup drop down list, select Launch on First Login.
- Click Apply. The Easy Configuration Wizard is presented after login for immediate configuration.
- Select the desired template and configure. See Working with SBC Easy Configuration.
Run using the Easy Configuration Wizard
If the Easy Configuration wizard is not enabled or configured during the Initial Setup (SBC SWe Lite Initial Setup, Sonus SBC 2000 - Initial Setup or Sonus SBC 1000 - Initial Setup) process, it can be accessed through the WebUI Task's tab.
Access the Easy Configuration wizard:
- In the WebUI, click the Tasks tab.
- In the left navigation pane, go to SBC Easy Setup > Easy Config Wizard. The Easy Configuration screens open.
- Select the desired template and configure. See Working with SBC Easy Configuration.
Overview
Content Tools