Usage of the Easy Config wizard to configure the SBC Edge Portfolio (SBC) does not modify existing configuration. The wizard will simply add the new configuration elements to the SBC.
The SBC Easy Config interface includes a built-in step-by-step setup configuration wizard, which enables end-users to quickly deploy SBC in an Enterprise's VoIP environment with a SIP Trunk Provider to an IP phone. The SBC can be configured to use a SIP trunk to connect to IP phones using the automatic setup wizard as described in the section below.
The following SIP Trunks are supported:
- ATT SIP Trunk
- KDDI SIP Trunk
- NTT DOCOMO Officelink
- Other SIP Trunk
- SoftBank ConnecTalk
- SoftBank White Office
- Telstra Enterprise SIP Connect
- Verizon SIP Trunk
- Broadsoft Trunk
- Twilio SIP Trunk
NTT DOCOMO Officelink, SoftBank ConnecTalk, Softbank White Office and Telstra Enterprise SIP Connect are supported in SBC 1000/2000 only.
Broadsoft Trunk is applicable only if the user endpoint is an IP phone.
Depending on the SIP trunk selected, the specific configuration fields are displayed in the Wizard. These are noted below.
Step 1 - Select Scenario
These instructions assume the SBC Easy Config wizard is running. See Using the Easy Configuration Wizard.
Select the Application type (SIP Trunk ↔ IP Phones). Enter the scenario configuration details based on your deployment settings. Once completed, click Next to move to Step 2 (or Cancel to return to the main WebUI screen).
Scenario Parameters
Application
The scenario in which the configuration template is provided. In this case, select SIP Trunk ↔ IP Phones.
Scenario Description
Enter the name to describe the SIP Trunk ↔ IP Phone setup.
This value will be prefixed on all the SBC configuration elements created by the Setup Wizard pertaining to this deployment.
Telephone Country
The country in which the SIP Trunk ↔ IP Phones originates.
Emergency Services
The E911 Elin number from the "CompanyName" field configured in Skype location services is used as the authoritative Call Back number for outgoing E911 calls, and is always the preferred configuration. Specifically, it will take precedence over any Callback Number number configuration in Skype Setup. For more information, see Creating and Modifying Entries to Transformation Tables.
This field defines the Emergency Services for outgoing numbers. For the purpose of this illustration above, Emergency Services is not selected. Field definitions are defined below.
Options: ELIN Identifier, E911/E112 or None.
Emergency Callback Number 1
Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
Emergency Callback Number 2
Second Call Back Number in string format. This field is displayed only when ELIN Identifier or E911/E112 is selected from Emergency Services.
PSAP Number
Defines the Public Safety Answering Point Number. Valid entry 1 - 127 characters.
SIP Sessions
Number of simultaneous SIP sessions allocated. Valid entry 1 - 960.
SIP Trunk Fields
Name (SIP Trunk)
The SIP trunk used for connection to the IP phones. Valid options: ATT SIP Trunk, Other SIP Trunk, Verizon SIP Trunk, KDDI SIP Trunk, Broadsoft Trunk, SoftBank ConnecTalk, SoftBank White Office, NTT DOCOMO Officelink, and Twilio SIP Trunk.
The SIP Trunk selected determines the field options displayed in Step 2. see Step 2 - Configure SIP Details for Endpoint.
Broadsoft Trunk Type
Defines the Broadsoft Trunk Type. Valid entry: Enterprise or Access.
This field is available only when the SIP Trunk type is Broadsoft Trunk.
User Type (IP Phone Registrar)
IP Phone Registrar. This field is fixed.
Step 2 - Configure SIP Details for Endpoint
Enter the scenario configuration details based on your endpoint. Once completed, click Next to move to Step 3 (or Previous to return to the previous screen).
ATT SIP Trunk - Field Definitions
These fields apply if you selected AT&T SIP Trunk in Step 1 - Select Scenario.
AT&T SIP Trunk
Border Element Server
The FQDN or IP address of the Remote Peer service provider.
Protocol (Border Element Server)
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number (Border Element Server)
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Use Secondary Border Element Server
Enables or disables the secondary Remote Peer service provider configured.
Secondary Border Element Server
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol (Secondary Border Element Server)
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number (Secondary Border Element Server)
The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled.
AT&T Simultaneous Ring Supported
Enables/disables support for the AT&T Simultaneous Ring feature. Valid option: Yes or No.
AT&T IP Toll Free
Enables/disables the AT&T Toll Free option. Valid option: Enabled or Disabled.
IP Toll Free Access Number
The Toll Free Access Number to use when the AT&T IP Toll Free option is enabled.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
KDDI SIP Trunk - Field Definitions
These fields apply if you selected KDDI SIP Trunk in Step 1 - Select Scenario.
KDDI SIP Trunk
SIP Server
The FQDN or IP address of the Session Border Controller service provider.
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
Main Telephone Number
The main telephone number associated with the SIP trunk.
Called Prefix (FMC Service)
Used for setting up transformation rules for the FMC service.
Address of Record URI (Contact Registrant Entry)
Address of Record of the client that is registered on the SIP server.
Static Host (SIP Profile)
Address of Static Host. Valid options: FQDN[:port] or IP4 [:port] or [IP6]:port
Authentication ID (Remote Authorization Entry)
The user identification to use in authentication.
Enter Password
The password to use when authenticating with the user ID.
Confirm Password
Re-enter the password to use with authentication for confirmation.
DNS Server IP (Split DNS Table)
IP address (IPv4 or IPv6) of the DNS server. The DNS Server IP address is for an SBC 1000/2000 that uses Split DNS with a primary DNS server, secondary DNS server, and a domain-specific DNS server for resolving FQDNs as required on internal and external networks.
Domain Name
Domain name associated with the DNS IP address.
Add Split DNS Entry
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan (IP Phone Registrar)
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
For SIP Registrar, refer to
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
NTT DOCOMO Officelink - Field Definitions
These fields apply if you selected NTT DOCOMO Officelink Trunk in Step 1 - Select Scenario.
For an IP Phone as the user end point, Easy Configuration loads a generic template which follows the “National Numbering Plan” guidelines.
NTT DOCOMO Officelink Trunk
Office Link FOMA-R
The Host IP address of the SIP Server.
Protocol
The IP protocol used for sending and receiving SIP messages between SBC and the SIP Server. Default value: UDP.
Port
The SIP Server Port number used for sending and receiving SIP messages between the SBC and the SIP Server. Default value: 5062.
CUG Domain Name
The FQDN of the SIP Server.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Defines the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
- Network IP. IP address for the destination host or subnet in which the IP phone resides.
- Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Add Network/Mask
Other SIP Trunk - Field Definitions
These fields apply if you selected Other SIP Trunk in Step 1 - Select Scenario.
Other SIP Trunk
Border Element Server
The FQDN or IP address of the Remote Peer service provider.
Protocol
The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid entry UDP or TCP.
Port Number
The SIP Server Port number used for sending and receiving SIP messages between the SBC and the Border Element Server. Default entry: 5060.
Use Secondary Border Element Server
Enables or disables the secondary Remote Peer service provider configured.
Secondary Border Element Server
Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled.
Protocol
The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled.
Port Number
The Port Number used for sending and receiving messages between the SBC and the Secondary Border Element server. Default entry: 5060. This field is available only when Use Secondary Border Element Server is Enabled.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Defines the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between the SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP: IP address for the destination host or subnet in which the IP phone resides.
Netmask: The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
SoftBank ConnecTalk - Field Definitions
These fields apply if you select SoftBank ConnecTalk in Step 1 - Select Scenario.
SoftBank ConnecTalk
Primary SIP Server
The host IP address or FQDN of the primary SIP server.
Secondary SIP Server
The host IP address or FQDN of the secondary SIP server.
WAN Link
The method to connect networks. This field has the following options: Routerless and Router.
Signaling/Media Source IP
The user-specified IP address for SIP signaling messages.
Gateway ID (Remote Authorization Entry)
The ID that authenticates with the router at the gateway of the network.
Gateway Password
The password that authenticates with the router at the gateway of the network.
Confirm Password
Re-enter the password for the router that serves as the network gateway.
From/To Header Host (SIP Profile and Contact Registrant Entry)
The IP or FQDN of the SIP Profile and Contact Registrant Table.
Contact Header URI
This field automatically generates using the Gateway ID at the From/To Header Host.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Select the IP phone numbering plan to use. This field has the following options: E.164, National, and Extension.
Number of Users
Define the number of users. A valid entry is between 1 - 1000.
Protocol
The Protocol that communicates with the IP phone. This field has the following options: UDP and TCP.
Port Number
The Port Number that sends and receives messages between the SBC and the Server Pool Host. The default value is 5060.
IP Phone Network Addresses
Configure a network address and network mask for the host or subnet in which the IP phone resides.
Network IP: The IP address for the destination host or subnet in which the IP phone resides.
Network Mask: The network mask of the destination host or subnet in which the IP phone resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
SoftBank White Office - Field Definitions
These fields apply if you selected SoftBank White Office in Step 1 - Select Scenario.
SoftBank White Office
WAN Link
The method used for connecting networks. Options are: Routerless and Router. On selection of Routerless, the Easy Config displays the Signaling/Media Source IP field and the SIP Server field. On selection of Router, the Easy Config displays the SIP Server field only.
Signaling/Media Source IP
The user-specified IP address to be used for SIP signaling messages. The Signaling/Media Source IP field does not display when the option selected for the WAN Link field is Router.
SIP Server
The host IP address or FQDN for the SIP server.
Gateway ID
The ID used for authenticating with the router at the gateway of the network.
Gateway Password
The password used for authenticating with the router at the gateway of the network.
Confirm Password
Re-entry of the password for the router serving as the network gateway.
Address of Record URI
The public address that points to the domain for users, for use in the Contact Registrant Entry. For example, specify: GatewayID@SIPServer.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Defines the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Telstra Enterprise SIP Connect - Field Definitions
These fields apply if you selected Telstra Enterprise SIP Connect in Step 1 - Select Scenario.
Telstra Enterprise SIP Connect Trunk
NAT Public Interface
The public interface used for Network Address Translation (NAT).
State
The state to use in configuring the outbound proxy for the Provider SIP Trunk. Options include: Australia Capital Territory, New South Wales, Northern Territory, Queensland, South Australia, Tasmania, Victoria, and Other (a user-specified FQDN).
Protocol and Port
Hard coded as UDP and Port 5060.
SIP Connect DNS IP
The IPv4 address used to create a Split DNS entry for the Telstra domain.
SIP Connect Domain/Realm
The SIP Connect Domain or Realm to which the specified IP address will map.
Authentication User ID
The User ID for use in authentication.
Authentication Password
The password to use when authenticating with the User ID.
Confirm Password
The re-entered password for confirmation.
Trunk Pilot Number
The 9-digit pilot number Telstra assigned for use with the SIP Connect trunking service.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Defines the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Defines the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in in which the IP phones reside.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Verizon SIP Trunk - Field Definitions
These fields apply if you selected Verizon Managed Service in Step 1 - Select Scenario.
Verizon SIP Trunk
Border Element Server
The FQDN or IP address of the Remote Peer service provider.
Protocol (Border Element Server)
The IP protocol used for sending and receiving SIP messages between SBC and the Border Element Server. This value is fixed at UDP.
Port Number (Border Element Server)
The SIP Server Port number used for sending and receiving SIP messages between SBC and the Border Element Server.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Broadsoft Trunk - Field Definitions
These fields apply if you selected Broadsoft Trunk in Step 1 - Select Scenario.
Server Domain
The FQDN of the server domain.
Enterprise Trunking
Enables/disables Enterprise Trunking. This field is available only when Enterprise Trunking is selected in the Broadsoft Trunk Type field.
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Twilio SIP Trunk - Field Definitions
These fields apply if you selected Twilio SIP Trunk in Step 1 - Select Scenario.
Field | Description |
|---|---|
| Border Element Server | The FQDN or IP address of the Remote Peer service provider. |
| Protocol | The IP protocol used for sending and receiving SIP messages between the SBC and the Border Element Server. Valid entries: UDP or TCP. |
| Port Number | The port number for the SIP server used to send and receive SIP messages between the SBC and the Border Element Server. |
| Use Secondary Border Element Server | Enables or disables the secondary Remote Peer service provider configured. |
| Secondary Border Element Server | Specifies the Secondary Border Element Service provider. Valid entry: IP Address or FQDN. This field is available only when Use Secondary Border Element Server is Enabled. |
| Protocol | The Protocol used for communicating with the Secondary Border Element Server. Valid entry: UDP or TCP. This field is available only when Use Secondary Border Element Server is Enabled. |
| Port Number | The Port Number is used for sending and receiving messages between SBC and the Secondary Border Element server. This field is available only when Use Secondary Border Element Server is Enabled. |
| Signaling/Media Source IP | Select the external (Internet-facing) IP address for the server that handles routing of messages for signaling and media. |
| Outbound NAT IP | Allows the SBC to be placed behind a NAT device, and uses the IP of the NAT device for all outgoing messages. If this field is set to Enable, the Public IP address field configuration is required. Valid selections:
NOTE: This field is required when the SBC interface has a private IP and the NAT device is using a public IP. For details on configuring an SBC behind the NAT, refer to Configuring the SBC Edge Portfolio for NAT Traversal. |
IP Phone Registrar - Field Definitions
IP Phone Numbering Plan
Selects the IP phone numbering plan to be used. Valid options: E.164, National, or Extension.
Number of Users
Define the number of users. Valid entry 1 - 1000.
Protocol (IP Phone)
The Protocol used for communicating with the IP phone. Valid entry: UDP or TCP.
Port Number (IP Phone)
The Port Number used for sending and receiving messages between SBC and the IP phone. Default entry: 5060.
IP Phone Network Addresses
Configure a network address and Netmask for the host or subnet in which the IP phone resides.
Network IP. IP address for the destination host or subnet in which the IP phone resides.
Netmask. The network mask of the destination host or subnet in which the IP phones resides.
To create a network address, click the add icon. Enter the Network IP and Network Mask and click OK.
Step 3 - Confirm and Submit Configuration
This steps displays a summary of the the configuration items from Step 1 and Step 2. Click Finish (to cancel the configuration, click Cancel).
This example displays a SIP ↔ IP Phones with a Generic SIP Trunk.
Step 3
Overview
Content Tools