Configuration Wizards - H323 Enterprise Access

The SBC Core support enterprise access through H323 IP-PBX's located at customer premises.

Prerequisite

You can use the default Address Context or create a new Address Context from ALL perspective.

 
Prerequisites for the workflow H323 Enterprise Access are:

• Address context
• IP Interface group
• IP Interface

Workflow

This section provides a high-level understanding of H323 Enterprise Provisioning.

H323 Enterprise Access Workflow

 

H323 Enterprise Access Provisioning Flow

The following figure shows the provisioning flow of the H323 Enterprise Access.

Step 1: Set Up Address Context and Zone

H323 Enterprise Access 1

 

Perform the following tasks to setup the Zone:

1. Select H323 Enterprise Access > Setup a Zone.
2. In the Address Context drop-down list, select the address context.
3. Select the Zone from the drop-down list. 
4. Click Next .
5. To create a new Zone, click Create New Zone next to the Zone drop-down box and enter the following details:
   • Zone Name
   • DNS Group
   • Zone Id
6. Click Save.

Step 2: Add a H323 Trunk Group

H323 Enterprise Access 2

Perform the following tasks to add a H323 Trunk Group.

1. Enter the H323 Trunk Group Name.
2. Enter the following details:
   1. Policy
   2. Packet Outage
   3. Call Reservation
   4. CAC
   5. Services
   6. Media
   7. Call Routing
   8. Ingress IP Prefix

3. Click Next . The following dialog appears:

    

   H323 Enterprise Access 3

   
4. Click Yes to add more SIP Trunk Group or click No to proceed.

Step 3: Add IP Peer (Optional)

H323 Enterprise Access 4

Perform the following procedure to add a IP Peer.

1. Expand IP Peer.
2. Enter the IP Peer details (Mandatory fields).

3. Click Next to proceed.
   The following window appears:

   H323 Enterprise Access 5

   
4. Click Yes to add more Ip Peers and click No to continue.

Step 4: Finish and Save

H323 Entrprise Access 6

Click Finish and Save. The result of this action is displayed.

Workflow - Result

Click OK to exit.