View and Edit Signaling

To view and edit Signaling:

  1. Log on to the EMA as a "Calea" user. For more information, refer to Users and Application Management - User and Session Management.
  2. Click Expand All.
  3. Navigate to Intercept → Call Data Channel → Mediation Server → Signaling.
  4. Select the default Address Context, Call Data Channel, and Mediation Server in the drop-down box.

Signaling is supported only for IMS LI configurations. Refer to Intercept Flavors and Configuration Details for configuration details.


The Signaling window is displayed:


Signaling Parameters

Parameter

Length/Range

Description

IP Address V4 or V6 

IPv4: 32-bit format

IPv6: 128-bit format

IPv4 or IPv6 address of the mediation server for signaling interception.

Port Number0-65535Specifies the port number of the mediation server for signaling interception. The range is 0 - 65535.
DSCP Value0-63Specifies the DSCP value for intercepted media packets sent on this port. The default value is 16.

Protocol Type

N/A

Specifies the protocol used by the mediation server for signaling interception.

  • TCP (default) 
  • UDP
Mode

N/A

Specifies the mode of the signaling connection towards the mediation server.

  • In Service
  • Out Of Service (default)

State

N/A

Specifies the state of the signaling connection towards the mediation server.

  • Disabled (default) 
  • Enabled
DF Group Name

Up to 63 characters

The name of the DF Group configured against the Intercept Targets for which this Mediation server is to be used for interception.

 Note: This parameter applies to PC2 LI and IMS LI configurations. However, it is optional in IMS LI.

Click Save to save the configuration.