This object displays the LI Mediation Server TCP Media intercept parameters.

To View and Create/Edit TCP

To view TCP parameters, log on as "Calea" user. For more information, refer to Users and Application Management - User and Session Management.

On the SBC main screen, navigate to Configuration > Intercept > Call Data Channel > Mediation Server > Media > TCP.

Note

TCP is supported only for PCSI and IMS LI configurations. Refer to Intercept Flavors and Configuration Details for configuration details.

You can configure TCP for each Mediation Server under each Call Data Channel and default Address Context. Use the drop-down box to select the default Address Context, Call Data Channel, and Mediation Server.

The TCP window is displayed.


The following fields are displayed:

Parameter

Length/Range

Description

IP Address V4 or V6 

N/A

IPV4/IPV6 address of the mediation server for media interception over TCP.

Port Number 0-65535Specifies the port number of the mediation server for media interception over TCP. 

Dscp Value

0-63

Specifies the DSCP value for intercepted media packets sent on TCP port. Default = 16.

Mode

N/A

Specifies the mode of the TCP connection towards the mediation server for media interception.

  • In Service
  • Out Of Service (default)

State

N/A

Specifies the state of the TCP connection towards the mediation server for media interception.

  • Disabled (default) 
  • Enabled
KA Time60-7200Specifies the duration (In seconds) between the two keep alive transmissions in the idle condition. Default = 180 seconds.
KA Interval5-60Specifies the duration (In seconds) between two successive keep alive re-transmissions, if acknowledgement to the previous keep alive transmission is not received. Default = 30 seconds.
KA Probe4-8Specifies the number of re-transmissions to be carried out before declaring that the remote end is not available. Default = 4.


Click Save to save the configuration.