In this section:
Perform the following steps:
To create a PSP, execute the following command:
set profiles media packetServiceProfile PSP commit
To enable RTCP Mux, execute the following command:
set profiles media packetServiceProfile PSP rtcpOptions rtcp enable rtcpMux enable commit
To attach the PSP to the SIP Trunk Group, execute the following command:
set addressContext default zone defaultSigZone sipTrunkGroup ingress_TG policy media packetServiceProfile PSP commit
In the PSX Manager window, choose Packet Service Profile from the drop-down menu.
Figure 1: PSX - Packet Service Profile
To create Packet Service Profile, right click on the Selection Area.
Figure 2: Selection Area
Select New from the resultant pop-up menu. The Packet Service Profile window is displayed.
Provide the Packet Service Profile name.
Figure 3: Packet Service Profile
Click Save to create the new Packet Service Profile.
The RTCP-MUX
flag is visible only when the option RTCP is enabled in the PSP.
Choose the RTCP option from the PSP to enable it. This action enables the RTCP configurable flags.
Figure 4: RTCP-MUX
Select RTCP-MUX
from the RTCP options.
Click Save.