Specifies the list of Registrar Recovery flags for both H323 and SIP Trunk Groups. Use this object to configure IPSP profile.
If both request command (Sip Trunk Group - Cmds) and IPSP flags are configured, command takes the preference over IPSP flags.
To View and Edit Registrar Recovery Flags
On SBC main screen, go to All > Profiles > Signaling > IP Signaling Profile > Common IP Attributes > Registrar Recovery. The Registrar Recovery window is displayed.
On the Call Transfer Flags window, from IP Signaling Profile drop-down list select the profile you wish to configure.
The Edit Registrar Recovery window is displayed.
Figure 1: Registrar Recovery
The following fields are displayed:
Table 1: Registrar Recovery Parameters
Parameter | Description |
|---|---|
| When enabled, SBC sends refresh REGISTER to alternate SIP server when Primary SIP server is down or unreachable. The options are:
|
| When enabled, SBC sends refresh REGISTER to primary SIP server and re-establishes connection when primary SIP server is reachable. The options are:
This flag is visible only when |
| When enabled, SBC de-registers itself from the alternate SIP server when the connection with primary SIP server is established. The options are:
This flag is visible only when |
| When enabled, the internal expires timer for registration is overridden and forwards refresh REGISTER to available SIP server. When disabled, refresh REGISTER is answered locally by SBC until the internal Expires Timer expires. The options are:
This flag is visible only when |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools