In this section:
Use this parameter to define the offending event characteristics and the trigger event type.
On the SBC main screen, navigate to All > Profiles > Services > Enhanced DBL Profile > Rule > Criteria > Offending Event.
The Offending Event window is displayed.
Select the Enhanced DBL Profile and Rule from the respective dropdown lists.
Figure 1: Enhanced DBL Profile and Rule - dropdown
The Edit Offending Event window is displayed.Select the value for the parameter Trigger Event Type
from it's dropdown list.
The parameters displayed in the Edit Offending Event window varies, based on the value selected for the parameter Trigger Event Type.
Trigger Event Type
set to Authentication Timeout
Trigger Event Type
set to Bad SIP Message
Trigger Event Type
set to Receipt of Message
The parameters and their description are given in the table below:
Table 1: Edit Offending Event - Parameter Description
Parameter | Description |
---|---|
Method Resp | The failure response code(s) of the offending event for the given method, which is sent towards the endpoint.
Note: This parameter is displayed only when the value of the parameter |
Trigger Event Type | The type of offending trigger events.
|
Method Type | The offending method type.
Note: This parameter is not displayed when the value of the parameter Trigger Event Type is set |
Make necessary changes and click Save to save the changes. Click Undo Edits to cancel the changes.