Use this parameter to define the period over which occurrences of the offending event will match the count so that an action is triggered.

On the SBC main screen, navigate to All > Profiles > Services > Enhanced DBL Profile > Rule > Criteria > Occurrence.

The Occurrence window is displayed.

Figure 1: Occurrence window


Select the Enhanced DBL Profile and Rule from the respective dropdown lists.


The Edit Occurrence window is displayed.


By default, the parameter Consecutive is set to Enabled.

When the parameter Consecutive is set to Disabled, the parameters Reset Method Resp and Reset Method Type is displayed.


The parameters and their descriptions are given in the table below:

Table 1: Occurrence - Parameter Description Table

ParameterDescription
Reset Method Resp

Use this parameter to specify one or more responses (101-699) for the configured method to reset the offending event counter. For example, [ 200 302 ].

Note:

  • This parameter is displayed only when the parameter Consecutive is set to Disabled.
  • When you use more than one value, enclose the values in square brackets [ ], separating each value with a space. Entering a value without using brackets appends the value to the existing configuration.
Count Type

The type of count that is used.

  • Aggr Count
Aggr Count ValueThe value of Count Type when it is set to Aggr Count.
Timer WindowThe specified period in seconds (1-86400) during which the offending event count must match the criteria to trigger an action. The default value is 60.
Consecutive

This flag defines the resetting behavior for the offending event count.

  • Enabled (default) - If enabled, receiving any non-offending event for the trigger increments the internal reset count value.
  • Disabled - If disabled, receiving configured (Reset Method Type and Reset Method Resp) event for the trigger increments the  internal reset count value.
Reset Method Type

The method type for resetting the offending event count.

  • ALL
  • BYE
  • CANCEL
  • INFO
  • INVITE
  • MESSAGE
  • NOTIFY
  • OPTIONS
  • PRACK
  • PUBLISH
  • REFER
  • REGISTER
  • SUBSCRIBE
  • UPDATE
Reset Count

The number (1-10) of resetting events that are required to remove the entry from the tracking. The default value is 1.

Note: This parameter is displayed only when the parameter Consecutive is set to Disabled.

Make necessary changes and click Save to save the changes. Click Undo Edits to cancel all changes.


  • No labels