This section helps you to understand the Isub flags for Egress Ip Attributes.
To View and Edit Isub
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Isub. The Isub window is displayed.
DEFAULT_H323
On the Isub window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Isub flags for H323 Trunk Group.
There are no Isub flags for DEFAULT_H323 type of Egress Ip Attributes.
DEFAULT_SIP
On the Isub window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Isub flags for SIP Trunk Group.
The following fields are displayed:
Table 1: Egress Ip Attributes SIP Isub Parameters
Parameter | Description |
---|---|
Allow Nsap Isub | Enable to allow NSAP ISUB parameter.
|
Allow User Specified Isub | Allow user-specified ISUB.
|
Include Called Party Isub | Include called party ISUB.
|
Include Calling Party Isub | Include calling party ISUB.
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.