This object specifies parameters associated with H.323, SIP, SIP-I communication that are sent as part of the outgoing signaling message after standard protocol rules have been applied.

You can associate IP signaling profiles with IP trunk groups and virtual trunk groups.

To View IP Signaling Profile

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile. The IP Signaling Profile window is displayed.

Figure 1: System Provisioning - Ip Signaling Profile


To Edit IP Signaling Profile

To edit any of the IP Signaling Profiles in the list, click the radio button next to the specific IP Signaling Profile name.

The Edit Selected IP Signaling Profile window is displayed below.

Figure 2: System Provisioning - Ip Signaling Profile Edit Window


Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

To Create IP Signaling Profile

To create a new IP Signaling Profile, click New IP Signaling Profile tab on the IP Signaling Profile List panel.

Figure 3: System Provisioning - Ip Signaling Profile Fields


The Create New IP Signaling Profile window is displayed.

Figure 4: System Provisioning - Ip Signaling Profile Create Window


The following fields are displayed:

Table 1: System Provisioning - IP Signaling Profile Parameters

Parameter DescrIPtion
Name The name of this IP signaling profile.
IP Protocol Type

Select one of the following depending on the protocol being supported by the associated trunk group.

  • sIPOnly
  • sIPl
  • h323

To Copy IP Signaling Profile

To copy any of the created IP Signaling Profiles and to make any minor changes, click the radio button next to the specific IP Signaling Profile to highlight the row.

Click Copy IP Signaling Profile tab on the IP Signaling Profile List panel.

Figure 5: System Provisioning - Ip Signaling Profile Fields


The Copy Selected IP Signaling Profile window is displayed along with the field details which can be edited.

Figure 6: System Provisioning - Ip Signaling Profile Copy Window


Make the required changes to the required fields and click Save to save the changes. The copied IP Signaling Profile is displayed at the bottom of the original IP Signaling Profile in the IP Signaling Profile List panel.

To Delete IP Signaling Profile

To delete any of the created IP Signaling Profile, click the radio button next to the specific IP Signaling Profile which you want to delete.

Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.

Click Yes to remove the specific IP Signaling Profile from the list.

  • No labels