DO NOT SHARE THESE DOCS WITH CUSTOMERS!

This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.

In this section:

 


Common Call Statistics Terminology
Stable CallsCalls that are established and fully stable (connected and media cut-through type of calls) and will survive a fail-over. This excludes calls in establishing, clearing and updating states which will not survive a fail-over.
Active CallsA snapshot of total number of active calls on the SBC at the point of execution of the status command. This count reflects the actual live calls on the box independent of the state of the call (setup, stable, updating or clearing).
Call AttemptsAccumulative number of attempted calls on this system since the last reboot/start-up, including calls where a setup was sent/received, uncompleted calls (calls failed, busy, not answered, etc.) and calls completed (answered).
Call CompletionsAccumulative number of calls completed on this system since the last reboot/start-up.

The SBC allows the operator to access data from the current interval and from the interval statistics table related to each object being monitored. The current interval consists of a statistics table entry that is accumulating data for the next interval report. The interval statistics table is a series of statistics table entries containing data from the most recently completed n intervals (where n is the number of intervals in the retention policy configuration).

Note
Refer to Links to Statistics Pages to navigate to a particular EMA or CLI statistics page.


Note

If using the EMS in your network, configure EMS PM data collection intervals for the SBC to be both:

  • Equal to or greater than the SBC intervals size, and
  • Not less than the SBC interval size multiplied by the SBC number of intervals.

Refer to the Insight EMS User Guide for configuration details.


Note

The SBC intentionally does not display results of all calls when there is a high volume of traffic for the statistics below. This limitation is built into the SBC software to avoid excessive CPU usage and system timeouts.

  • sipActiveGroupRegStatus
  • sipActiveRegisterNameStatus
  • sipDeletedRegisterNameStatus
  • sipSigConnStatus
  • sipSigTlsSessionStatus

 

 

Address Context

Command Syntax

> show status addressContext
	cacOffenderStatus 
	callDetailStatusDetail 
	callMediaStatusDetail 
	callSummaryStatusDetail 
	diamNode
	dnsGroup
	dynamicBlackList 
	enhancedDBL
	intercept
	ipAccessControlList
	ipInterfaceGroup 
	ipRouteStatus
	ipsec
	linkDetectionGroup 
	linkDetectionGroupStatistics 
	linkDetectionGroupStatus 
	logicalSigAddressBindingStatus 
	relayCurrentStatistics 
	relayIntervalStatistics
	relaySessionStats
	sipActiveGroupRegStatus
	sipActiveGroupRegSummaryStatus 
	sipActiveRegisterNameStatus
	sipDeletedRegStatus
	sipDeletedRegisterNameStatus 
	sipGeneratedSubscriptionStatus 
    sipRegCountDomainCurStats
    sipRegCountDomainIntStats
    sipRegCountDomainStats
	sipRegCountStatistics
	sipSubCountStatistics
	sipSubscriptionCountStatistics 
	sipSubscriptionStatus
	surrRegCountStatistics 
	zone 
	zoneCurrentStatistics
	zoneIntervalStatistics 
	zoneStatus 

Command Parameters

Address Context Parameters

ParameterDescription

cacOffenderStatus

This object displays recent SIP endpoint CAC offender details at the aggregate level (as opposed to the Address Context level) since the last system boot or restart.

Go to Show Status Address Context - CAC Offender Status for details.

callDetailStatusDetail

Call status details per address context.

Go to Show Status Address Context - Call Status Details for details.

callMediaStatusDetail 

Call media status details per address context.

Go to Show Table Address Context - Call Status Details for details.

callSummaryStatusDetail 

Call summary details per address context.

Go to Show Table Address Context - Call Status Details for details.

diamNode

Diameter node configuration details.

Go to Show Status Address Context - Diameter Node for details.

dnsGroup 

DNS Server Groups in this address context.

Go to Show Status Address Context - DNS Group  for details.

dynamicBlackList

The collection of DBL policers.

Go to Show Status Address Context - Dynamic Blacklist  for details.

enhancedDBL 

The enhanced DBL related operations.

Go to Show Status Address Context - Enhanced DBL Status  for details.

intercept

Lawful Intercept Call Data Channel statistics details.

Go to Show Status Address Context - Intercept  for details.

ipAccessControlList 

IP Access Control list details for this address context.

Go to Show Status Address Context - IP Access Control List  for details.

ipInterfaceGroup

IP Interface Group details for this address context.

Go to Show Status Address Context - IP Interface Group  for details.

ipRouteStatus 

IP route details including the local IP interfaces and protocols associated with the next hop routes.

Go to Show Status Address Context - IP Route Status

ipsec 

IPsec configuration, security policy database, IKE peer table.

Go to Show Status Address Context - IPsec

linkDetectionGroup

Link Detection Groups in this address context.

Go to Show Status Address Context - Link Detection Group

linkDetectionGroupStatistics

Statistics for link failure detected per link detection group.

Go to Show Status Address Context - Link Detection Group 

 

linkDetectionGroupStatus

The status of a link detection group.

Go to Show Status Address Context - Link Detection Group 

logicalSigAddressBindingStatus

The collection of logical signaling address bindings

Go to Show Status Address Context - Logical Signal Address Binding Status 

relayCurrentStatistics

Relay count current statistics

Go to Show Status Address Context - Relay Statistics 

relayIntervalStatistics 

Relay count interval statistics

Go to Show Status Address Context - Relay Statistics  

 

relaySessionStats 

Relay session statistics

Go to Show Status Address Context - Relay Statistics  

 

sipActiveGroupRegStatus 

This table presents the active SIP registration status for a list of SIP endpoints with unique id.

Go to Show Status Address Context - SIP Registration Status  

sipActiveGroupRegSummaryStatus

This table presents the active SIP registration status summary for a list of SIP endpoints.

Go to Show Status Address Context - SIP Registration Status   

sipActiveRegisterNameStatus 

This table presents the active SIP registration status for a list of SIP endpoints.

Go to Show Status Address Context - SIP Registration Status 

sipDeletedRegStatus 

This table presents the deleted SIP registration status for a list of SIP endpoints with unique id.

Go to Show Status Address Context - SIP Registration Status   

sipDeletedRegisterNameStatus

This table presents the deleted SIP registration status for a list of SIP endpoints.

Go to Show Status Address Context - SIP Registration Status   

sipGeneratedSubscriptionStatus

This table presents the active SIP subscription status for a list of SIP endpoints.

sipRegCountStatistics 

This table presents SIP registration count statistics for the SIP endpoints.

Go to Show Status Address Context - SIP Registration Status 

sipRegCountDomainCurStats

This table presents per-domain SIP registration statistics for the current statistics interval.

Go to Show Status Address Context - SIP Registration Status 

sipRegCountDomainIntStats

This table presents per-domain SIP registration interval statistics.

Go to Show Status Address Context - SIP Registration Status 

sipRegCountDomainStats

This table presents registration statistics on a per domain basis.

Go to Show Status Address Context - SIP Registration Status 

sipSubCountStatistics 

This table presents SIP relayed subscription count statistics for the SIP endpoints

Go to Show Status Address Context - SIP Subscription Status   

sipSubscriptionCountStatistics

This table presents SIP subscription count statistics for the SIP endpoints.

Go to Show Status Address Context - SIP Subscription Status    

sipSubscriptionStatus 

This table presents the active SIP subscription status for a list of SIP endpoints.

Go to Show Status Address Context - SIP Subscription Status    

surrRegCountStatistics

This table presents Surrogate registration count statistics for the SIP endpoints.

Go to Show Status Address Context - Surrogate Registration Count Statistics    

zone

Signaling, media, and control for a zone in the address context.

Go to Show Status Address Context - Zone

zoneCurrentStatistics

The Zone Statistics Current table.

Go to Show Status Address Context - Zone   

zoneIntervalStatistics

The Zone Statistics Interval table.

Go to Show Status Address Context - Zone  

zoneStatus

The current status for zones in this address context.

Go to Show Status Address Context - Zone  

 

Command Examples

General Examples

 

To display the link Detection Group Status:

> show status addressContext default linkDetectionGroup
	 MGMT_LDG2 linkMonitorStatus MGMT_LM2 
{
monitorStatus monitoring; 
linkStatus up; 
}
linkMonitorStatus MGMT_LM4 
{
monitorStatus portDown; 
linkStatus portDown; 
}
linkMonitorStatistics MGMT_LM2 
{
minTime 336; 
maxTime 740; 
averageTime 375; 
singleFailures 0; 
doubleFailures 0; 
failures 0; 
replies 13; 
duplicateReplies 0; 
lateReplies 0; 
}
linkMonitorStatistics MGMT_LM4 
{
minTime 0; 
maxTime 0;
averageTime 0; 
singleFailures 0; 
doubleFailures 0; 
failures 1; 
replies 0; 
duplicateReplies 0; 
lateReplies 0; 
}

 

To view default ACL statistics details:

 

> show status addressContext default ipAccessControlList defaultAclStatistics
defaultAclStatistics 9 {
    protocol             UDP;
    application          dns_udp_guest;
    addressContextId     *;
    lifGrpId             *;
    sourceIpAddress      "* (53)";
    destinationIpAddress "* (0)";
    policingMode         PktRate;
    bucketSize           "50 pkt";
    creditRate           "1000 pkt/s";
    polId                0;
    polPriority          0;
    packetAccept         0;
    packetDiscard        0;
    aggPol               none;
    owner                vm;
    vmGuestId            Vm1;
}

 

Examples Showing Audio and Video Usage

Audio-Only CLI Output
admin@SBC01> show status addressContext default ipInterfaceGroup IG1                  
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          6488;
    txPackets          140;
    allocatedBandwidth 15800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:47:26]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          270;
    txPackets          2626;
    allocatedBandwidth 15800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:47:28]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             124;
    bwOutboundUsage            0;
    packetOutDetectState       normal;
}
[ok][2014-07-17 16:47:36]

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             0;
    bwOutboundUsage            124;
    packetOutDetectState       normal;
} 

 

Video-Only CLI Output
admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          236;
    txPackets          1318;
    allocatedBandwidth 128000;
    actualBandwidth    21008;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:33:21]

admin@SBC01> show status addressContext default ipInterfaceGroup IG1
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          5343;
    txPackets          126;
    allocatedBandwidth 128000;
    actualBandwidth    23648;
    bwDeviation        0;
    numMediaStreams    1;
}
[ok][2014-07-17 16:33:25]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             1000;
    bwOutboundUsage            0;
    packetOutDetectState       normal;
}

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             0;
    bwOutboundUsage            1000;
    packetOutDetectState       normal;
} 

 

Both Audio and Video CLI Output
admin@SBC01> show status addressContext default ipInterfaceGroup IG1                  
ipInterfaceStatus IF1 {
    ifindex            13;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          6502;
    txPackets          154;
    allocatedBandwidth 143800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    2;
}
[ok][2014-07-17 16:55:12]

admin@SBC01> show status addressContext default ipInterfaceGroup IG2
ipInterfaceStatus IF2 {
    ifindex            14;
    operState          resAllocated;
    oosReason          notApplicable;
    rxPackets          281;
    txPackets          2635;
    allocatedBandwidth 143800;
    actualBandwidth    0;
    bwDeviation        0;
    numMediaStreams    2;
}
[ok][2014-07-17 16:55:19]

admin@SBC01> show status addressContext default zone ZONE_IN_PCR1377 trunkGroupStatus 
trunkGroupStatus TG_IN_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          1;
    outboundCallsUsage         0;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             1124;
    bwOutboundUsage            0;
    packetOutDetectState       normal;
}
[ok][2014-07-17 16:55:31]

admin@SBC01> show status addressContext default zone ZONE_OUT_PCR1377 trunkGroupStatus
trunkGroupStatus TG_OUT_PCR1377 {
    state                      inService;
    totalCallsAvailable        -1;
    totalCallsInboundReserved  0;
    inboundCallsUsage          0;
    outboundCallsUsage         1;
    totalCallsConfigured       -1;
    priorityCallUsage          0;
    totalOutboundCallsReserved 0;
    bwCurrentLimit             -1;
    bwAvailable                -1;
    bwInboundUsage             0;
    bwOutboundUsage            1124;
    packetOutDetectState       normal;
} 
> show addressContext default sipActiveRegisterNameStatus
sipActiveRegisterNameStatus Ribbon@10.54.8.191 268 {
    state                    completed;
    contactURI               sip:Ribbon@10.70.52.91:5070;
    nextHopIpAddress         10.70.52.91;
    nextHopPortNum           5070;
    registrarIpAddress       10.128.254.86;
    registrarPortNum         5090;
    externalExpirationTime   3598;
    internalExpirationTime   3600;
    creationTime             2014-06-27T09:35:54+00:00;
    registrarDomainName      "";
    endPointBehindNapt       0;
    natPinholeLearningStatus none;
    securityMechanismType    none;
    isRoaming                1;
}

 

To view SIP Peer CAC Status details:

show status addressContext addr_1 zone ZONE_IAD sipPeerCacStatus
sipPeerCacStatus "" 10.54.80.151 0 nonRegistrantSipPeer {
    createdAt                             2017-05-15T12:08:16+00:00;
    ingressCallsAllowed                   19;
    ingressCallsActive                    1;
    ingressCallRejectsLimit               28;
    ingressCallRejectsRate                0;
    egressCallsAllowed                    0;
    egressCallsActive                     0;
    egressCallRejectsLimit                0;
    egressCallRejectsRate                 0;
    state                                 enabled;
    ingressDblAggregateMessagesAllowed    0;
    ingressDblAggregateMessageRejectsRate 0;
    egressDblAggregateMessagesAllowed     0;
    egressDblAggregateMessageRejectsRate  0;
    ingressMessagesAllowed                0;
    ingressMessageRejectsRate             0;
    egressMessagesAllowed                 0;
    egressMessageRejectsRate              0;
    ingressNotifysAllowed                 0;
    ingressNotifyRejectsRate              0;
    egressNotifysAllowed                  0;
    egressNotifyRejectsRate               0;
    ingressOptionsAllowed                 0;
    ingressOptionsRejectsRate             0;
    egressOptionsAllowed                  0;
    egressOptionsRejectsRate              0;
    ingressOtherRequestsAllowed           59;
    ingressOtherRequestsRejectsRate       0;
    egressOtherRequestsAllowed            0;
    egressOtherRequestsRejectsRate        0;
    ingressRefersAllowed                  0;
    ingressReferRejectsRate               0;
    egressRefersAllowed                   0;
    egressReferRejectsRate                0;
    ingressResponsesAllowed               0;
    ingressResponseRejectsRate            0;
    egressResponsesAllowed                0;
    egressResponseRejectsRate             0;
    ingressSubscribesAllowed              0;
    ingressSubscribeRejectsRate           0;
    egressSubscribesAllowed               0;
    egressSubscribeRejectsRate            0;
    bandwidthRejectsLimit                 0;
    videoThresholdLimit                   0;
	totalIngressHpcCallsAllowed           0;
	rejectsMaxIngressHpcCallRate		  0;
	rejectsIngressMaxHpcCalls             0;
	numActiveIngressHpcCalls              0;
	totalEgressHpcCallsAllowed            0;
	rejectsEgressMaxHpcCalls              0;
	numActiveEgressHpcCalls               0;
}