DO NOT SHARE THESE DOCS WITH CUSTOMERS!
This is an LA release that will only be provided to a select number of PLM-sanctioned customers (PDFs only). Contact PLM for details.
IMPORTANT
The SBC 51xx and SBC 52xx platforms are not supported from release 11.0.0 onwards. This release supports the SBC 5400, SBC 7000 and SBC SWe platforms.
This section includes the following topics for installing and configuring the SBC 5000 series (51x0/52x0) and SBC 7000 software components.
Software Installation Overview
- SBC 5000 and 7000 Series Software Components
- Installation Sequence
- System Name and Hostname Naming Conventions
Creating an IP Plan
Configuring the SBC 5000 Series Platform
- Configuring BMC IP Address Via Serial Console
- BMC Brute-Force Password Guessing
- Configuring SBC 5xx0 BMC for Remote Access
- Configuring the Host Network Management Interface
- Configuring NTP Server Settings Using the BMC
- Uploading New SSL Certificates using the BMC
- Changing the BMC Password
- Launching the Remote Console from the BMC
Configuring the SBC 7000 Platform
- Configuring SBC 7000 BMC IP Address Via Serial Console
- Configuring SBC 7000 BMC for Remote Access
- Configuring SBC 7000 Host Network Management Interface
- Configuring NTP Server Settings Using SBC 7000 BMC
- Uploading New SSL Certificates using SBC 7000 BMC
- Changing the SBC 7000 BMC Password
- Launching the Remote Console from the SBC 7000 BMC
Installing SecureLink for Remote Access
Installing SBC Application
- Downloading Software from the Ribbon Support Portal
- Uploading SBC Package to SBC Platform
- Setting Up Physical Connection between High Availability Nodes
- Gathering Information for SBC Installation
- Installing SBC Standalone
- Installing SBC HA
Re-Installing ConnexIP Operating System for SBC 5000 Series
Re-Installing ConnexIP Operating System for SBC 7000 Series
The SBC Core system is a closed network device. Customer modifications at the Linux level are not allowed or supported. These modifications can cause stability, update and fail-over issues. Customers should only configure the SBC using the supported interfaces (Ribbon SBC Core CLI, REST API, EMA, or Ribbon EMS).
Warning
Overview
Content Tools