In this section:

Related articles:

Overview

Use the signaling profile Ioi To Carrier Code Mapping Profile to specify the Inter Operator Identifier (Ioi) string mapped to the carrier code.

For information on other related profiles for SIP-ISUP and interworking between different SIP flavors, refer to Support for SIP-ISUP.

To View, Select, and Edit Ioi To Carrier Code Mapping Profile

  1. On the SBC main screen, navigate to All → Profiles → Signaling → Ioi To Carrier Code Mapping Profile.

  2. The Ioi To Carrier Code Mapping Profile window displays. 

    Ioi To Carrier Code Mapping Profile

  3. In the Ioi To Carrier Code Mapping Profile List pane, select a profile using the radio button.

  4. The selected profile is displays below in the Edit Selected Ioi To Carrier Code Mapping Profile pane.

    Edit Selected Ioi To Carrier Code Mapping Profile

To Copy a Selected Ioi To Carrier Code Mapping Profile

  1. In the Ioi To Carrier Code Mapping Profile List pane, select a profile using the radio button.
  2. Click Copy Ioi To Carrier Code Mapping Profile.

  3. The Copy Selected Ioi To Carrier Code Mapping Profile pane displays. 

    Copy Selected Ioi To Carrier Code Mapping Profile

  4. Edit the field values, and click Save.

To Create a New Ioi To Carrier Code Mapping Profile

  1. Click +New Ioi To Carrier Code Mapping Profile.

  2. The Create New  Ioi To Carrier Code Mapping Profile pane displays. 

    Create New Ioi To Carrier Code Mapping Profile

    Ioi To Carrier Code Mapping Profile - Field Descriptions

    FieldLength/RangeDefaultDescriptionM/O
    Ioi1-128 charactersN/A

    Specifies the Inter Operator Identifier (Ioi) string for the carrier.

    NOTE: You can configure a maximum of 200 entries.

    		M
    Carrier Code
    		4 digits (0-9)N/A

     Specifies the carrier code (4-digit numeric string consisting of digits in the range 0-9) mapped to Inter Operator Identifier.

    		M
    X Aut

    4-16

    Note: Accepted lengths are 4, 8, 12, and 16.

    		Not Set

    Specify the value to include in the X-AUT header when interworking between sipJJ9030InterworkingProfile flavors JJ9030 and X-Header.

    xAut supports characters from 0 to 9, and a to f.


    4. Enter the field values, and click Save.

To Delete a Selected Ioi To Carrier Code Mapping Profile

  1. Select a profile in the Ioi To Carrier Code Mapping Profile List pane, and click the delete icon at the end of the selected row.
  2. Confirm the delete prompt.
  3. A success message displays.