This section specifies the Post Gateway Ringing Delay (PGRD) signaling quality measurement.

To View and Edit Qoe - Pgrd

On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Trunk Group > H323Trunk Group > H323 Trunk Advanced > Qoe > Pgrd. The Pgrd window is displayed.

The Qoe - Pgrd can be checked for each Address Context, for each Zone, for each H323Trunk Group created or for all the Address Contexts, Zones and H323Trunk Groups created. Use the drop-down box to select the desired Address Context, Zone and H323Trunk Group.

The Edit Pgrd window is displayed.

H323 Trunk Advanced - Qoe - Pgrd Edit Window

 

The following fields are displayed:

H323 Trunk Advanced - Qoe - Pgrd Parameters


Parameter


Description

Critical Qos Pgrd LimitSpecifies the critical Post Gateway Ringing Delay limit, above which the call admission should be stopped. The value range from 50 - 10000 and the default value is 2000.
Default Pgrd FactorSpecifies the default value to be used as Post Gateway Ringing Delay when no calls are made for a sampling period. The value range from 50 - 10000 and the default value is 500.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.

 

  • No labels