EdgeMarc 4806 Front Panel

EdgeMarc 4806 Front Panel Components

Physical
Label/Type		FunctionDescription
SD Card
Interface		Storage

Enhanced SD host controller (eSDHC). Allows the EdgeMarc to save configurations and other files to an SD High Capacity Version 2.0 card. Maximum storage capacity is 32 GB per SD card, 4 GB per file. SD card capabilities are configured with the web-based configuration menu and with command-line interface (CLI). Refer to EdgeMarc SD Card Specifications.

Front Panel
Power/Status
LEDs		Status
  • Off: Power is not supplied to the device or bootloader failed to load.
  • On: Solid Green—Power is supplied to the unit. VOS is ready.
  • Flashing Green—The device is loading the EdgeMarc VoIP Operation System (VOS).
  • Solid Amber—The device is running a self-test and is initializing.
  • Flashing Amber—The device is upgrading its software.
  • Red—The device is in the bootloader. The kernel will change the LED to solid amber once the kernel starts loading.
LAN Ports 1-8LAN8 x 10/100/1000 Mbps RJ-45 Ethernet ports for LAN network connectivity (copper). Default IP: 192.168.1.1
Dual WAN Ports 1-2WAN

2 x 10/100/1000 Mbps RJ-45 Ethernet ports for WAN network connectivity (copper and modular optical). The EdgeMarc 4806 supports dual WAN port capability for added flexibility. Dual WAN port functionality is configured on the EdgeMarc 4808 Series WAN Port 1 and WAN Port 2.

WAN Fiber/Link
Access LEDs		StatusFiber port support 1Gb link:
  • Solid green LED indicates peer link is powered.
  • Blinking LED indicate fiber traffic activity.
WAN SFP Ports 1-2WANSmall Form-Factor Pluggable (SFP) for fiber connectivity.
Either the SFP port (operating at 100/1000 Mbps) or the RJ-45 (operating at 10/100/1000 Mbps) port can be active at a time.
T1 LEDsStatusSolid green—Phone is in the off-hook state.
Off—Phone is in the on-hook state.

T1 RJ48
Ports 1-2

—2 x T1 default system configuration. Two ports are available on the main board. Unused ports are covered with an RJ-45 cap.
FXO LEDsStatusSolid green—Phone is in the off-hook state.
Off—Phone is in the on-hook state.
FXO RJ11 Ports 1-2—2 x RJ11 connector for 2 FXO channels.
FXS LEDsStatusSolid green—Phone is in the off-hook state.
Off—Phone is in the on-hook state.
FXS Amphenol 1-6—1x Amphenol connect for 6 FXS channels.