In this section:

Supported SFP/SFP+ Modules

The following tables list and describe the supported SFP/SFP+ Modules.

Type

SourceManufacturer Part NumberNotes

10/100/1000BASE-T (Copper)

AvagoABCU-5710RZThe link is only established at 1 Gbps when using copper SFP Modules.

Methode   

DM7041-R

1000BASE-SX

Amphenol553250001An 850 nm module supporting a maximum distance of 550 m over single mode or multimode fiber.
IntelTXN31111An 850 nm module supporting a maximum distance of 550 m over single mode or multimode fiber.
FiberxonFTM-8012C-SLGAn 850 nm module supporting a maximum distance of 550 m over single mode or multimode fiber.
1000BASE-LXAvagoAFCT-5710PZA 1310 nm module supporting a maximum distance of 10 km over single mode fiber.
FinisarFTLF1318P2BTA 1310 nm module supporting a maximum distance of 10 km over single mode fiber.
FTLF1319P1BTLA 1310 nm module supporting a maximum distance of 10 km over single mode fiber.
10GBASE-SR


Avago

AFBR-703SDZ

--
Opnext

TRS2001EN-00001

850 nm, 300 M with OM3 MMF
FCI

TRX10GVP2010

--
Finisar

FTLX8571D3BCL

--

10GBASE-LRM   




FCI   

TRX10GDL0610

--

Finisar   

FTLX1371D3BCL

1310 nm, 220 M with MO1 fiber

Avago   

AFBR-707SDZ

--

10G Copper Cable




Tyco 

2032237-4

3.0m

Molex   

74752-2301

--
FCI10110818-3030-LF--

Molex   

74752-4701

7.0m


SFP/SFP+ EMI/Dust Plug

If the 10 GbE Switch Fat Pipe (SFP/SFP+ bays) connections do not have a module installed, these connections should have an SFP/SFP+ EMI/dust plug installed (Ribbon PN 11-200Q056610 or Tyco PN1888901-1, see the following figure). This plug reduces emissions from internal AMC671 MCH circuitry and helps prevent dust in the bay. The plug has a tang that mates with the SFP/SFP+ cage to ensure proper retention.

SFP/SFP+ EMI/Dust Plug


SFP/SFP+ Module Extraction Actuators

Two principle extraction actuators (see the following figure) are employed on SFP/SFP+ modules:

  • bale actuator
  • MSA actuator

SFP/SFP+ Module Actuators


  • No labels