Note

The following section is only applicable to the DSC 8000, the DSC SWe (on MA-RMS), the Signaling Platform 2000 (SP2000), and the virtual SP2000 (on MA-RMS).

The Transparent Inter-process Communication (TIPC) server is used for inter-process communication (IPC) between a Routing CPU (DRE) and an I/O card (AMC308, AMC348, or PCE382) through a Level 2 connection.

The TIPC is pre-configured for the Ribbon Signaling Systems; therefore, no provisioning is required. Depending whether the card is configured for ATM or TDM traffic, the TIPC server may support ATM or TDM protocols.

Only change the Debug Level attribute if instructed by Customer Support.

To view TIPC server information

  1. From the Main Menu, click the required I/O card on the Hardware image.

  2. Click the required I/O card.
      
  3. Click the required protocol (ATM or TDM, in this example TDM).

      
  4. Click the required ASP ID.

  • No labels