In this section:
The M3UA configuration screens can be used to configure the following:
- M3UA Basic Configuration
- M3UA Usage Configuration
The M3UA usage alarms are intended to provide a warning if an M3UA SCTP Association usage reaches a previously determined capacity. This alarm is intended as a mechanism for providing equivalent measurements in the IP network to that of the Erlang measurements in the SS7 network. All thresholds are applied separately to both the receive (Rx) and the transmit (Tx) side of the association (see To configure the M3UA usage).
To configure the M3UA
To stop or start M3UA monitoring
To configure the M3UA usage
Overview
Content Tools