Use the Flags window to view and edit the flags settings on an existing ENUM Service object.
To View and Edit Flags
On the SBC main screen, go to All > Global > Servers > ENUM Service > Flags
Select the ENUM Service object whose flags you want to view or edit in the ENUM Service drop-down list. The Edit Flags window opens for the selected ENUM Services object.
Figure 1: ENUM Service - Flags
Use the following table to configure the flag options and then click Save.
Table 1: Flags Parameters
Parameter | Description |
|---|---|
Active | Specifies the status of the ENUM Service object. The options are:
|
| Process Calling Number | Enable this flag to analyze the calling number using the prefix profile. When this flag is disabled, the calling number is not analyzed and therefore if it contains +CC, this value is sent to the SBC in the calling number field in the policy response. The options are:
|
| Process New ANI | When this flag is enabled for an ENUM AoR service, and an ENUM AoR response contains a " When this flag is disabled, any
|
| Skip Further Number Translation Services | When this flag is enabled, the SBC skips all further services and goes directly to routing. The options are:
|
| Send Orig Dialed Num Over Egress | When this flag is enabled, the SBC sends the original dialed number in the egress INVITE request after an ENUM dip. The options are:
|
Overview
Content Tools