Table of Contents
About this Page
This page describes how to employ SBC's Action Sets to create AD-integrated call applications for LYNC, LYNC analog, Exchange, PBX, and FAX devices. The functionality described below is very similar to VX's AD-integrated scripting.
Prerequisites
Requires AD integration
Some features require a direct connection (SIP trunk) between the SBC and Exchange
Assumes the user is familiar with configuring the SBC's WebUI
Assumes SBC version 2.2 or better
Assumes that a wizard has been executed
Assumes that the SIP destinations and signaling groups are already configured
Summary
Action Sets permit a programatic-like ability to manipulate a call before it is processed by the SBC's call router. The programtic capabilities include:
- The ability of control whether an entry is executed based upon the failure or success of a previous entry. Unlike the immuatble sequential execution of the entries in the Call Routing Table, Action Set entries can be skipped or executed based upon the failure or success of the previous entries in the table.
- Once an Action Set entry is executed, you can control what happens based upon whether the associated Transformation Table was successful.
Overview of the Applications
SBC AD-Integrated Call Application Flow Chart
Operation Modules - Descriptions
Operational Modules | Description |
|---|---|
Normalizes the called and calling numbers. Includes functions to strip digits, as well as to prepend digits. Also assigns the Exchange Subscriber Access (EUM SA) number. | |
Automatically disconnects calls listed in the Blacklisted Numbers tranformation table. | |
Searches AD attribute mobile, msRTCSIP-Line, and telephoneNumber using the calling number and returns the Calling Name, if found. | |
Processes calls for retrieving voicemail via the EUM SA. Attempts to automatically identify the caller to Exchange by searching AD attributes mobile, msRTCSIP-Line, and telephoneNumber for the calling number and returning the caller's UMbox number. | |
A two-number fax solution, searches AD attribute facsimileTelephoneNumber for the called number. If found, sets the diversion header to the destination UMbox number. The call is then routed to the EUMS SA. | |
Uses the Ring No Answer (RNA) Action Set feature to provide the ability for callers to leave voicemail for Lync analog devices. | |
Verifies the called number against the AD msRTCSIP-Line attribute and sends the calls to Lync. Backup routes provide rollover to Exchange and mobile (respectively) if Lync is unavailable. | |
Verifies the called number;ext= against the AD msRTCSIP-Line attribute and sends the calls to Lync. Backup routes provide rollover to Exchange and mobile (respectively) if Lync is unavailable. | |
The route of last resort, the original called and calling numbers are restored before sending the call to the PBX. |
More Information
Overview
Content Tools