Defines an M3UAMultiAssociationASP managed object.
Parameter Name | Required | Create | Read-Only | Data Type | Description |
---|---|---|---|---|---|
ID | Yes | Yes | Yes | int32 | TL1Name: ID |
Name | No | No | No | string | M3UA configured ASP name. Alphanumeric with dash and underscore for a maximum of 16 characters. Automatically moved to upper-case. Must be unique in M3UA. Reserved value DYNAMIC for non-configured ASPs. TL1Name: NAME |
ASPIDValidation | No | No | No | FeatureBoolean | It is highly recommended that for increased security that this attribute remain enabled. When enabled the ASP using the configured endpoint MUST either NOT send the ASP ID parameter OR send the preconfigured ID. If an ASP ID parameter contains an identifier other than what is preconfigured, an ERROR (Invalid ASP Identifier) will be sent. When disabled, the ASP Identifier contained in the ASPUP is not validated. This is typically useful when changing the ID used by the ASP is especially troublesome TL1Name: IDVAL |
IncomingAppID | No | No | No | string | M3UA Incoming AppID for Gateway Screening. On creation, the attribute is defaulted to M3UA_DEFAULT. TL1Name: INCOMING_APPID |
RCInDATAMessage | No | No | No | FeatureBoolean | When ENABLED the Routing Context parameter is included in DATA messages destined for the ASP. Per RFC4666, the inclusion of the Routing Context parameter in DATA messages is conditional. On creation, the attribute is defaulted to ENABLED. This setting has no affect when using M3UA Version M3UAv2. TL1Name: INCRC |
NAInDATAMessage | No | No | No | FeatureBoolean | When ENABLED the Network Appearance parameter is included in DATA messages destined for the ASP. Per RFC4666, the inclusion of the Network Appearance parameter in DATA messages is optional. On creation, the attribute is defaulted to ENABLED. This setting has no affect when using M3UA Version M3UAv2. TL1Name: INCNA |
ASPType | No | Yes | Yes | MultiASPType | Type of ASP. TL1Name: ASP_TYPE |
SCTPRole | No | Yes | Yes | SCTPRole | M3UA Multi Association ASP SCTP Role (CLIENT/SERVER). In a client configuration, each association (once activated) opens its SCTP pipe and tries to connect to the remote end point. In a server configuration, each association (once activated) starts listening for incoming connections on the local end point. TL1Name: ROLE |
M3UAVersion | No | Yes | Yes | M3UAVersion | M3UA Multi Association ASP M3UA Version (M3UAvRFC/M3UAv2). On Creation, this attribute is defaulted to M3UAvRFC TL1Name: M3UA VERSION |
NATranslation | No | No | No | NARange | NA Translation for M3UA Multi Association ASPs. If enabled, all M3UA messages from the ASP containing a Network Appearance parameter of 0 will be interpreted to mean the configured value chosen. This value will be used for pertinent statistics. A default value of 0 disables the feature. This feature is not to be used with the NA Override feature. TL1Name: NATRANS |
DefaultNetworkAppearance | No | No | No | DefaultNA | Upon receipt of an M3UA message which does not contain a Routing Context or Network Appearance parameter, the SG uses this value to determine the destination SS7 network. If this value is UNSET (-1), the Default Network Appearance specified in the M3UA SCTP Servers is used to determine the destination SS7 network. The Network Appearance must also be configured as an MTP3 NA. The default value is UNSET. Changing this attribute value can impact traffic. TL1Name: NA |
IMFSupport | No | No | No | FeatureBoolean | Integrated Monitoring Feed feature support for this ASP. IMF must be licensed to enable this attribute. IMF Support attributes can be cleared for all configured M3UA ASPs simultaneously by using the Reset IMF action in the M3UA Configured ASPs screen. TL1Name: IMF |
NAOVERRIDE | No | No | No | NaOverride | The NA Override attribute is used to populate the Network Appearance parameter in M3UA messages sent to the ASP. The NA Override value replaces the actual network appearance of the M3UA Application Server (routing key) for which the message is being directed. It also overrides any configured NA Translation value. NA Translation and NA Override should not be used together. The parameter takes values ranging from 0 to 999999999. When set to UNDEFINED (default) the actual network appearance of the M3UA Application Server is populated in messages sent to the ASP. The feature supports M3UA RFC. The features does not support SP2K ASPs. TL1Name: NA_OVERRIDE |
SS7NAOVERRIDE | No | No | No | ss7NaOverride | The SS7 NA Override attribute is used to override the Network Appearance parameter in M3UA DATA and DAUD messages which are received from this configured ASP. The NA Override value replaces the network appearance in the M3UA Data message. This NA value will determine to which SS7 Network the message will be forwarded. M3UA Data arriving from an ASP which does not contain a Network Appearance parameter will use this value. The parameter takes values ranging from 1 to 99. When set to UNDEFINED (default) the actual network appearance the M3UA message will be used to determine which SS7 network to forward the message. If set to UNDEFINED and the M3UA message does not contain a Network Appearance parameter then routing falls back to normal procedures to determine the SS7 Netork. The feature supports M3UA RFC ASPs both multi and standard. The feature does not support SP2K ASPs. TL1Name: SS7_NA_OVERRIDE |
Heartbeat | No | No | No | FeatureBoolean | Enable or disable the Heartbeat feature. SCTP Association must be de-activated and re-activated to take effect. TL1Name: HB |
HeartbeatInterval | No | No | No | int32 | Heartbeat interval (ms). SCTP Association must be de-activated and re-activated to take effect. TL1Name: HB_INTV |
RTOInitial | No | No | No | int32 | Initial Retransmission Timeout (ms). SCTP Association must be de-activated and re-activated to take effect. TL1Name: RTO_INIT |
RTOMinimum | No | No | No | int32 | Minimum Retransmission Timeout (ms). SCTP Association must be de-activated and re-activated to take effect. TL1Name: RTO_MIN |
RTOMaximum | No | No | No | int32 | Maximum Retransmission Timeout (ms). SCTP Association must be de-activated and re-activated to take effect. TL1Name: RTO_MAX |
MaximumInitRetrans | No | No | No | int32 | Maximum initial retransmissions. SCTP Association must be de-activated and re-activated to take effect. TL1Name: MAX_INIT_RETRANS |
MaximumAssocRetrans | No | No | No | int32 | Maximum association retransmissions. SCTP Association must be de-activated and re-activated to take effect. TL1Name: MAX_ASSOC_RETRANS |
MaximumPathRetrans | No | No | No | int32 | Maximum path retransmissions. SCTP Association must be de-activated and re-activated to take effect. TL1Name: MAX_PATH_RETRANS |
Bundling | No | No | No | FeatureBoolean | Enable or disable the Bundling feature. SCTP Association must be de-activated and re-activated to take effect. TL1Name: BUNDLING |
BundlingTimeout | No | No | No | int32 | Bundling timeout (msecs). SCTP Association must be de-activated and re-activated to take effect. TL1Name: BUNDLING_TO |
DelayedAckTimeout | No | No | No | int32 | Delayed acknowledgement timeout. SCTP Association must be de-activated and re-activated to take effect. TL1Name: DELAYACK_TO |
Checksum | No | No | Yes | SCTPCheckSum | Checksum algorithm. SCTP Association must be de-activated and re-activated to take effect. TL1Name: CHECKSUM |
InStreams | No | No | No | int32 | Number of in streams. SCTP Association must be de-activated and re-activated to take effect. TL1Name: INSTREAMS |
OutStreams | No | No | No | int32 | Number of out streams. SCTP Association must be de-activated and re-activated to take effect. TL1Name: OUTSTREAMS |
DSCP | No | No | No | Dscp | Differentiated Services Code Point is used to classify traffic within a network in order to determine the priority of the various classes of traffic (0 to 63). Default value: 0. TL1Name: DSCP |
TXAbatementL1 | No | No | No | TxQueuePercent | Transmit Congestion Abatement Level 1 (% of Tx Queue Size) TL1Name: TXABTL1 |
TXOnsetL1 | No | No | No | TxQueuePercent | Transmit Congestion Onset Level 1 (% of Tx Queue Size) TL1Name: TXONSTL1 |
TXAbatementL2 | No | No | No | TxQueuePercent | Transmit Congestion Abatement Level 2 (% of Tx Queue Size) TL1Name: TXABTL2 |
TXOnsetL2 | No | No | No | TxQueuePercent | Transmit Congestion Onset Level 2 (% of Tx Queue Size) TL1Name: TXONSTL2 |
TXAbatementL3 | No | No | No | TxQueuePercent | Transmit Congestion Abatement Level 3 (% of Tx Queue Size) TL1Name: TXABTL3 |
TXOnsetL3 | No | No | No | TxQueuePercent | Transmit Congestion Onset Level 3 (% of Tx Queue Size) TL1Name: TXONSTL3 |
CongestionLevel | No | No | Yes | CongestionLevel | Congestion level of this M3UA ASP. From 1 to 3, or FASLE if not congested. Congestion reporting is not supported on M3UA V2 ASPs TL1Name: CONGESTION_LVL |
M3UAMessageDiscard | No | No | No | MessageDiscard | M3UA Message Discard Congestion level of this M3UA ASP. ANSI variant has 3 congestion levels, while ITU uses only 1. Valid values range from 1 to 3, or DISABLED to never discard. A data message will be discarded if the message priority is less than or equal to both the configured discard level and the current congestion level of the association. TL1Name: DISCARD_LVL |
ReportCongestion | No | No | No | FeatureBoolean | used to determine if congestion alarms are raised TL1Name: REPORT_CONGESTION |