You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Status Panel LEDs

Status Panel LEDs

1. Power Status LED

This status LED indicates the power conditions of the Sonus SBC 1000/2000 system. The normal state of this LED is on and green.

ColorStatus
Green

System is connected to proper power source.

OffSystem is not connected to power source.

 

2. Alarms Status LED

This status LED indicates the alarm state of the Sonus SBC 1000/2000 system. The normal state of this LED is green, indicating there is no alarm.

For detailed information about alarm types, see Alarms and Events Reference.

Color Status
GreenNo alarm.
OffWarning (indicates the lowest severity level of an alarm has occurred). 
AmberMinor alarm.
RedMajor alarm.
Red Blinking

Critical alarm.

 

3. Peer Node Status LED (Locator LED)

The Peer Node Status LED is also recognized as the Locator LED when configuring this option in the WEB GUI. 

ColorStatus
GreenSystem is fully powered up.
OffUser Enabled option. LED is turned off through the LED Locator configuration option. See Configuring Host Information and DNS.
Blinking GreenUser Enabled option. LED is turned to blinking green through the LED Locator configuration option. Light will blink once per second. See Configuring Host Information and DNS.

 

4. Ready Status LED

This status LED indicates if the Sonus SBC 1000/2000 system is properly initialized. The normal state of this LED is on and green.

ColorStatus
GreenSystem is properly initialized.
OffSystem is not properly initialized.

Ethernet Port Status LEDs

This section describes the Ethernet Port Status LEDs located in the right and left corners of the Ethernet ports. See below for LED ranges.

Ethernet Port Status LEDs

1. Ethernet Port Status LED

The Ethernet LEDs displayed represent a Sonus SBC 1000; the Ethernet LEDs function the same for the Sonus SBC 2000.

This Ethernet Port Status LEDs indicate the status conditions of the Ethernet ports on the Sonus SBC 1000/2000 system.

Left-Side LED

Color Status
AmberIndicates Ethernet port speed at 10/100Mbps.
OffIndicates Ethernet port speed at 1000Mbps. 

Right-Side LED

ColorStatus
GreenEthernet link is established.
Flashing GreenEthernet link is active. Data is being sent/received.
OffEthernet link is down.

Right/Left LED Combinations

Left-Side ColorRight-Side ColorResult
AmberOffPort speed is 10Mbpbs. Ethernet link is down.
AmberGreenPort speed is 100Mbps. Ethernet link is established.
OffGreenPort speed is 1000Mbps. Ethernet link is established.
  • No labels