You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »


Caution

No system configuration changes should be made during an upgrade. If such a change is made, this change is not included in the new software release, and, therefore, the system may not behave as expected.

Before you start the software upgrade, it is assumed that you have completed the following tasks:

  • Completed a system backup for the SP2000 through the Web UI and stored it in a local directory 

  • Resolved any issues that might occur during the pre-upgrade process (refer to Performing the Pre-Upgrade Check on Executing the Pre-upgrade Check).

    Note

    If you have more than one issue that has to be resolved before you can start the software upgrade, find a resolution to each failed pre-upgrade check in the order these checks were presented. When all issues are resolved, execute the pre-upgrade check procedure from step 1.

  • Are familiar with using the 

    Unable to show "metadata-from": No such page "_space_variables"
    Menu-based user interface (Menu UI)

  • Logged onto the system as the root user

    Note

    If you require help using the Menu UI or logging onto the system, refer to the appropriate sections in the Web UI and Menu UI Guide and the DSC - SP2000 Platform Manager User Guide.

  • reviewed the information provided in Status Verification Before Upgrading the Software

If updating from a 18.x.y release, proceed directly to Planning the Maintenance Window.

If you are upgrading from a 3.x.y release, refer to the Release 18.1 Upgrade Documentation for more information. 


  • No labels