In this section:
Supported interface connectors on the AMC124 CPU faceplate are shown in following figure.
The serial console port is a 9-pin male DB9 connector that provides the COM1, from the Intel Xeon C5500 processor, through the Intel 3420 PCH, to the AMC124 faceplate. The serial cable provided with the AMC124 is a DTE connection (RS- 232 levels), allowing communications to a modem (DCE) without the need of a null modem. A null modem (DB9F to DB9F) allows connection to a terminal or PC (DTE) directly. The connector also accepts DB9 female connectors on standard cables. RS-232 signal levels and 15KV ESD protection are provided by the interface.
The following table describes the port pinout
Port 0 and Port 1 USB interface connectors are on the AMC124 faceplate.
The following table provides the pinout specification for these connectors.
The two (2) 1000Base-T Ethernet ports (RJ45 connectors) located on the AMC124 faceplate, are not used by the DSC 8000 system.
The external Ethernet ports are not used by the
The following table defines the optional Ethernet connector pins.