In this section:
Use this object to configure H323 Signaling Port for this zone.
Each signaling port within an Address Context must use a unique IP address.
Each signaling port within an Address Context must use a unique IP address and port number combination.
The SBC 5400 and SBC 7000 systems support creating IP Interface Groups containing sets of IP interfaces that are not "processor friendly" (i.e. carried on physical Ethernet ports served by separate processors). However, restrictions exist regarding the usage of such Interface Groups.
For complete details, refer to Configuring IP Interface Groups and Interfaces.
To View H323Sig Port
On SBC main screen, go to Configuration > System Provisioning > Category: Base Provisioning > Signaling Ports > H323Sig Port. The H323Sig Port window is displayed.
The H323Sig Port can be checked for each Address Context or for each Zone or for all the Address Contexts and Zones created. Use the drop-down box to select the desired Address Context and Zone.
To Edit H323Sig Port
To edit any of the H323Sig Ports in the list, click the radio button next to the specific H323Sig Port name.
The Edit Selected H323Sig Port window is displayed below.
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
To Create H323Sig Port
To create a new H323Sig Port, click New H323Sig Port tab on the H323Sig Port List panel.
The Create New H323Sig Port window is displayed.
The following fields are displayed:
To Delete H323Sig Port
To delete any of the created H323Sig Port, click the radio button next to the specific H323Sig Port which you want to delete.
Click Delete at the end of the highlighted row. A delete confirmation message appears seeking your decision.
Click Yes to remove the specific H323Sig Port from the list.