In this section:
Use this window to work with Session Recording Server (SRS) Group Profiles. An SRS is the target to which the SBC sends session recordings. The SBC supports configuring multiple SRSs on the ERE using SRS Group Profiles.
An SRS Group Profile includes common properties such as the type of load distribution and the number of simultaneous media streams. It also contains a maximum of eight SRS group data configurations, each of which identifies the specific characteristics for an SRS within the group.
Up to four SRS Group Profiles can be added to SRS Group Clusters to enable sending four simultaneous recordings. The SRS Group Cluster is then associated with call recording criteria. Refer to Global - Servers - Call Recording Criteria.
On the SBC main screen, navigate to All > Global > Servers > Srs Group Profile. The Srs Group Profile window is displayed.
Click New Srs Group Profile on the Srs Group Profile List window. The Create New Srs Group Profile window is displayed.
Select the Srs Group Profile by clicking the radio button adjacent to it in the Srs Group Profile List window. The Edit Selected Srs Group Profile window is displayed for the selected profile. Only the common properties of the profile are shown.
To make changes to the SRS group data configuration for a profile, use the Srs Group Data window. Refer to Global - Servers - Srs Group Profile - Srs Group Data.
Select the Srs Group Profile by clicking the radio button adjacent to it in the Srs Group Profile List window.
Click Copy Srs Group Profile on the Srs Group Profile List window. The Copy Selected Srs Group Profile window is displayed.
Select the Srs Group Profile by clicking the radio button adjacent to it in the Srs Group Profile List window.
Confirm the deletion when prompted.