You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Back to Table of Contents

Back to SBC SIP Transparency Implementation Guide

Additional section:

In this section:

Related articles:

 

Overview

The 

Unable to show "metadata-from": No such page "_space_variables"
supports Dialog Transparency which involves passing through "Call-ID", "From" tag, and "To" tag transparently in all the requests and responses. With a call traversing through multiple paths in an IMS VoLTE network, UEs and intermediate IMS entities need to correlate a call based on correct dialog information under various scenarios such as call transfer.

The dialogTransparency flag under the Zone object passes dialogs transparently for SIP messages processed in that specified zone. If dialog transparency is disabled, SBC translates the dialog identifiers in the Target-Dialog header received in INVITE and REFER messages and sends the Target-Dialog header with translated dialog identifiers on the other leg. If dialog transparency is enabled, Target-Dialog header translation is not performed. However, the header is transparently passed if configured in transparency profile.

The dialogTransparency flag must be enabled on both ingress and egress zones because if the flag is only enabled on one zone, all calls and messages are rejected. In this situation, the sonusSbxDialogTransparencyMisConfiguredNotification alarm is raised on the zone in which the flag is disabled.

Note

The following features are not supported on SBC when Dialog Transparency is enabled:

  • Support of local handling of REFER (REFER relay is supported)
  • Late media support 
  • Dialog Transparency support in REGISTER
  • NICE recording call flows
  • GW-GW support

Unable to show "metadata-from": No such page "_space_variables"
implements the SIP Dialog Identification internally based on certain SIP parameters. Manipulation of these parameters using the dialog scope SIP Message Manipulation (SMM) affects the intergrity of the dialog scope SMM functionality. The parameters to be considered differs based on whether the Dialog Transparency is enabled or not.

Unable to show "metadata-from": No such page "_space_variables"
supports both dialog transparency and spiral calls. To support these features, dialog stateful SMM must support multiple dialogs that have the same dialog identifiers. Dialog stateful SMM variables also support dialog transparency, which is enabled with INVITE and SUBSCRIBE dialogs.

Unable to show "metadata-from": No such page "_space_variables"
supports dialog stateful SMM variables to modify inbound or outbound SIP messages and dialog transparency to pass the dialog identifiers (call-id and tags) transparently. Similarly, for spiral calls, 
Unable to show "metadata-from": No such page "_space_variables"
handles multiple legs with same dialog identifiers (call-id and tags).
Unable to show "metadata-from": No such page "_space_variables"
distinguishes between the multiple legs using the proprietary parameter call-info. The parameter call-info is inserted in requests and responses outbound from the 
Unable to show "metadata-from": No such page "_space_variables"
in such a way that it must present in almost every subsequent SIP requests and responses of a dialog. 
Unable to show "metadata-from": No such page "_space_variables"
is now enhanced to support different SMM dialog for multiple call legs with same SIP dialog identifiers (call-id and tags). 
Unable to show "metadata-from": No such page "_space_variables"
supports dialog stateful SMM variables for INVITE and out-of-dialog SUBSCRIBE messages.

For more information on dialog stateful SMM variables, refer to SMM (Advanced) Examples.

Dialog Scope SMM without Dialog Transparency

If the advanced SMM is enabled in any adapter profile which applies to Trunk Group, manipulation of "From tag", "To tag" and "Call-ID header" is not supported for that Trunk Group. In rare cases where there is no other solution, manipulation of "To Tag" may be tested and implemented with the knowledge and support of Sonus Technical Support.

Note

This only works for Basic Call Flows.

Dialog Scope SMM with Dialog Transparency

If the advanced SMM is enabled in any adapter profile applying to a Trunk Group under a zone where the Dialog Transparency is enabled, manipulation of "branch parameter", "Call-Info parameter" or "Call-ID header" is not supported for that Trunk Group.

For example (no dialog transparency): consider a configuration where dialog scope variable is used in the inbound adapter profile applicable to Trunk Group TG_1 via Zone or Trunk Group. The SMM rules for an action specifying modification of "From-tag", "To tag" or "Call-ID" cannot be present in that inbound adapter as well as in the outbound adapter if one applies to "TG_1" through Trunk Group or Zone.

Dialog Transparency Call Flow

Note

Only relevant headers are shown in this call flow.

  • No labels