To create or modify an existing Port Forward Table entry:
In the left navigation pane, go to Protocols > IP > NAT > Port Forward.
To create a Port Forward Table entry:
Click the Create NAT Port Forward Entry ()icon.
Specifies the SBC logical interface connected to the external network. Any of the SBC's Ethernet or VLAN, except the Loopback Interface, may be used.
Specifies the IP address of the port forward destination on the private network.
Specifies the IP protocol allowed in the port forwarded connection.
Specifies the first IP port number to use on the external network. The specified port may not be one of the SBC1000/2000 reserved ports.
Specifies the first IP port number to use on the private network.
Specifies the number of ports to map from the external network to the private. No port in the resulting range may be one of the SBC Edge reserved ports.
Port | Protocol |
---|---|
1 | RAW |
22 | TCP |
53 | TCP |
80 | TCP |
161 | UDP |
443 | TCP |
500 | UDP |
514 | UDP |
4500 | UDP |
30000 | UDP |
30001 | UDP |
16384 through 16984 | RTP |