In this section:
Refer to Downloading the SBC SWe Lite Package prior to performing this procedure. Start the Virtual Machine Manager. Start Virtual Machine New Virtual Machine From the Create New Virtual Machine dialog, select Import existing disk image and click Forward. Create New Virtual Machine Select Linux from the OS type drop-down menu. Select Debian Squeeze from the Version drop-down menu . Click Browse and navigate to the location of the disk image. From the Choose Storage Volume dialog, select file SBCSWeLite-disk1.qcow2, then click Choose Volume. Click Forward. OS Type and Version Set Memory (RAM) field to 1024 and CPUs field to 1, and click Forward. Memory and CPU Settings Enter the name of your new VM in the Name field. Select the Customize configuration before install option. From the New VM dialog, select the applicable network from the Network selection drop-down menu, and click Finish. Finalizing Create New Virtual Machine In the new pop-up window, select Disk 1 (VirtIO or IDE). Expand Advanced options and select IDE from the Disk bus drop-down menu. Adding Hardware Click Add Hardware. Select Storage. Select Select or create custom storage. Navigate to file SBCSWeLite disk2.qcow2. Select IDE from the Bus Type drop-down menu, and click Finish. Managing Storage Repeat for Disk Three Select NIC. Select e1000 from the Device model drop-down menu, then click Apply. Modify Virtual Network Interface Click Add Hardware. From the Add New Virtual Hardware dialog, select Network. Select the desired Bridge id from the Network source drop-down menu. Select e1000 from the Device model drop-down menu, and then click Finish. Repeat steps 1-4 for additional Network Interfaces. Adding Network Interfaces Sonus recommends that all customers review and, if necessary, optimize their Network Interface configurations before proceeding. Failure to do so could lead to interface mapping issues. See Mapping Network Interfaces and then return to this section. From the Virtual Machine dialog, click Begin installation. Begin Final Installation SBC SWe Lite Running Click Open VM ConsolePrerequisites
Customize Configuration
Add the Virtual Disks
Modify Network Interface Device Model
Add Virtual Network Interfaces
Finalize Installation
Proceed to SBC SWe Lite Initial Setup. After setup is complete, proceed to License Installation.
If you are installing an SBC SWe Lite for a trial or demonstration deployment, proceed to Obtaining and Installing a SWe Lite Trial License.
If you are installing an SBC SWe Lite instance to carry live enterprise traffic, proceed to Obtaining and Installing a SWe Lite License.