CLI Changes in This Release

New CLI in 9.0.0R0

SBX-73090 Performance Registration Statistics per Domain

 The SBC now collects interval-based SIP registration statistics per domain. This allows you to retrieve statistics for the current interval or a series of intervals using the SBC CLI.

CLI Syntax

The following is the syntax for retrieving per-domain SIP registration statistics for the current statistics interval.

> show status|table addressContext <addressContext_Name> sipRegCountDomainCurStats <DomainName>

The following is the syntax for retrieving per-domain SIP registration interval statistics.

> show status|table addressContext <addressContext_Name> sipRegCountDomainIntStats <DomainName>

Command Parameters

The following statistic fields appear in the output. 

SBX-86128 Specifying More than 50 Destinations for SIPREC Group

To support specifying FQDNs for SRS servers, this feature adds FQDN-related parameters in the following contexts. 

Command Syntax – SRS Group Data

To enable configuring SRS servers with FQDNs, the SBC adds fqdn and fqdnPort parameters to the srsGroupData components in an SRS group profile. 

% set global servers srsGroupProfile <profile name>
    description <0-199 characters>
    loadDistribution <roundRobin | sequence>
    numSimultaneousStream <1-2>
    srsGroupData <0-7>
        cryptoSuiteProfile <cryptoSuiteProfile>
        fqdn <FQDN>
          fqdnPort <0-65535> 
        ipAddress <IP address>
          ipPort <0-65535>
        ipTGId <IP TG Id>
        srtp <disable | enable>
        transport <tcp | tls | udp>

Command Parameters – SRS Group Data

Command Syntax – Start Record

To enable initiating a recording through CLI using an FQDN, the SBC adds the srsFqdn1 and srsFqdn2 parameters for specifying a target SRS server in a SIPREC start record (startRecord).

% request global siprec startRecord
        callLeg
            egress
            ingress
        gcid <0-2147483647>
        numOfStreams <1-2>
        srsFqdn1 <FQDN>
        srsFqdn2 <secondary FQDN>
        srsIpAddress <SRS IP address>
        srsIpAddress2 <secondary SRS IP address>
        srsPort <IP port number>
        srsPort2 <secondary IP port number>
        transport <tcp | udp>
        transport2  <tcp | udp>
        trunkGroup <trunk group name>
        trunkGroup2 <secondary trunk group name>

Command Parameters – Start Record

Command Syntax – Stop Record

The SBC adds the recorderFqdn and recorderId parameters in SIPREC stop records (stopRecord) to enable specifying the FQDN of an SRS server or a unique identifier for the recording session among the criteria that you can use to identify which recording session to stop.

% request global siprec stopRecord
          gcid <0-2147483647>
          recorderAddress <SRS IP address>
          recorderFqdn <SRS FQDN>
          recorderId <session ID>
          recorderPort <port number>

Command Parameters – Stop Record

SBX-88296 ANI-DNIS Loop Detection

An ANI-DNIS loop refers to a situation when more than one call request shares the same combination of ANI (Automatic Number Identification) and DNIS (Dialed Number Identification Service) values. This feature adds a new aniDnisZoneloopDetection object to zones. This object has a state parameter to control whether ANI-DNIS loop detection is enabled and a parameter that defines the limit for loop instances per ANI-DNIS pair.

Command Syntax

% set addressContext <addressContext name> zone <zone name> aniDnisZoneloopDetection
    aniDnisZoneLoopInstances <1..1250>
    aniDnisZoneState <disabled | enabled>

Command Parameters

Refer to Zone - ANI-DNIS Loop Detection - CLI for more information.

SBX-91618 Using an OOD REFER to Terminate an Active Call

This feature adds a new signaling parameter for SIP trunk groups that controls whether the SBC locally handles OOD REFER requests. 

Command Syntax

% set addressContext <addressContext name> zone <zone name> sipTrunkGroup <trunkGroup name> signaling localOODReferSupport <disabled | enabled>

Command Parameters

Refer to SIP TG - Signaling - Local OOD REFER Support - CLI for more information.

SBX-93310 Enhance the processing of Contact headers in REGISTER messages

This feature adds a new configuration object, the Register Contact Profile, and a new zone option to assign a profile to a zone.

Command Syntax - Profile

% set profiles signaling registerContactProfile <profile name>
    contactIncludeVariables <hostpart | userpart>

Command Parameters - Profile

Command Syntax - Zone

% set addressContext <addressContext name> zone <zone name> registerContactProfileName <registerContactProfile name>

Command Parameter - Zone

For more information refer to Creating Multiple User Registrations Based on Contact Headers in REGISTER Messages.