In this section:
Basic operations for Virtual Machines and Hyper-V installed on the ASM are available through the WebUI (ASM Virtual Machines table).
Virtual Machine/Hyper-V Action
Operate Virtual Machine
Basic operations can also be executed through Hyper-V; these updates are reflected in the WebUI.
- Through the WebUI, access ASM Virtual Machines. See Accessing and Modifying ASM Virtual Machines.
- Click the checkbox next to the VM in which you wish to execute an action.
From the menu bar, click Virtual Machine Action.
Virtual Machine Operations
From the drop down list, select the desired action.
VM Basic Operations
Operation Effect VM State after Operation Start Starts the VM.
NOTE: The SBA does not need to be running for a VM to be deployed.Running Turn Off Turns off the VM immediately without going through the full shut down process.
When the VM is "Turned off", it is not available in the ASM Virtual Machines table.Stopped Shut Down Shuts down the VM. Stopped Save Saves a copy of the current VM image. Saved Pause Pauses the selected VM. Paused Resume Returns the VM to Running state (from the Paused stated). Running Reboot A message confirms the reboot. Once the VM is rebooted, it returns to Running state. Running For details on VM states, see Accessing and Modifying ASM Virtual Machines.
Start/Stop Hyper-V
Stopping Hyper-V will also stop the VMs.
The Hyper-V Action options start/stop Hyper-V services on the host.
- Through the WebUI, access ASM Virtual Machines. See Accessing and Modifying ASM Virtual Machines.
From the menu bar, click Hyper-V Action.
Hyper-V Operations
From the drop down list, select the desired action.
Hyper-V Operations
Operation Effect VM State after Operation Start Starts Hyper-V services on the host. Running. Stop Stops Hyper-V from running on the host. All VMs are stopped and will not appear in the table. Most VMs will need to be manually re-started via Hyper-V Manager.
Overview
Content Tools