Table of Contents
About this Page
  • This document details how to configure SMM Rules to restore upper-case letters in a customer SIP header.
Related Articles

Prerequisites

Requires Sonus SBC1000/2000 Version 2.2 or later

This document assumes the user has a working knowledge of the SBC, its WebUI and the SMM function.

 

Summary

When adding a custom SIP header, the case of letters in the added header is not preserved. To restore the proper case, a second SMM entry, using the Raw Rule, is needed.

Input Invite

 

INVITE sip:6001@10.1.24.57:5060;user=phone SIP/2.0
user-to-user: 04412C312C49412C696476313130302C49445F552C41522C2C2C2C4E2C4E2C4E6F6E652C;encoding=hex
Allow: INVITE, ACK, CANCEL, BYE, UPDATE, NOTIFY, OPTIONS, REFER, REGISTER
Call-ID: call-8AA25A00-0000-0010-0C13-29@10.1.24.37
Contact: <sip:07768200610@10.1.24.37:5060;transport=UDP>
Content-Length: 263
Content-Type: application/sdp
CSeq: 1 INVITE
From: <sip:07768200610@10.1.24.37:5060>;tag=c0a8e61b-61
Max-Forwards: 70
P-Asserted-Identity: <sip:07768200610@10.1.24.37:5060>
Referred-By: <sip:33333@10.1.24.80;transport=tcp>
Supported: replaces,update,100rel
To: <sip:6001@10.1.24.57:5060;user=phone>
User-Agent: NET UX 2.2.1v195 UX
Via: SIP/2.0/UDP 10.1.24.37:5060;branch=z9hG4bK-UX-c0a8-e61b-0439

 

 

Configuring SMM to Restore Upper-Case Letters

  1. Create a Header Rule that adds the User-to-User header and populates it with the value stored in SG User Value 1. SG User Value 1 would have been populated using a different SMM rule at the ingress SG.

    Create SIP Header Rule

  2. When the SBC creates the new header, the case of the letters is not preserved (all the upper-case letters are sent as lower-case). To re-establish the proper case, make a second entry in the SMM table - a Raw Rule. Set the regex input to the lower-case and the regex output to the desired case. The Raw Rule will restore the desired case.

    Create SIP Raw Message Rule

     

  3. The resulting SMM table. Make sure to apply the SMM Table to the egress Signaling Group.

    User to User

Output Invite

 

INVITE sip:6001@10.1.24.57:5060;user=phone SIP/2.0
User-to-User: 04412C312C49412C696476313130302C49445F552C41522C2C2C2C4E2C4E2C4E6F6E652C;encoding=hex
Allow: INVITE, ACK, CANCEL, BYE, UPDATE, NOTIFY, OPTIONS, REFER, REGISTER
Call-ID: call-8AA25A00-0000-0010-0C13-29@10.1.24.37
Contact: <sip:07768200610@10.1.24.37:5060;transport=UDP>
Content-Length: 0
Content-Type: application/sdp
CSeq: 1 INVITE
From: <sip:07768200610@10.1.24.37:5060>;tag=c0a8e61b-61
Max-Forwards: 70
P-Asserted-Identity: <sip:07768200610@10.1.24.37:5060>
Referred-By: <sip:33333@10.1.24.80;transport=tcp>
Supported: replaces,update,100rel
To: <sip:6001@10.1.24.57:5060;user=phone>
User-Agent: NET UX 2.2.1v195 UX
Via: SIP/2.0/UDP 10.1.24.37:5060;branch=z9hG4bK-UX-c0a8-e61b-0439

 
  • No labels