Use this object to specify use of domain names.
On the SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile > Egress IP Attributes > Domain Name.
The Domain Name window is displayed. Select the IP Signaling Profile from the drop-down list.
Trunk Provisioning - Egress IP Attributes H323 Domain Name
The Edit Domain Name window is displayed.
Trunk Provisioning - Egress IP Attributes SIP Domain Name
Egress IP Attributes Domain Name Parameters
Parameter | Description |
---|---|
Use SIP Domain Name In From Field | By default, Unable to show "metadata-from": No such page "_space_variables" uses its IP address as the host-port of the FROM URI in the outgoing INVITE message. Enable flag to use the originating gateway information returned in the policy response as the host-port of the FROM URI in the outgoing INVITE message.
When the "Use SIP Domain Name In From Field" is enabled, the following parameters are available:
|
Use SIP Domain Name In Request URI | Use SIP Domain Name In Request URI Flag.
When Use SIP Domain Name In Request URI is enabled, the following parameters are available:
|
Use Zone Level Domain Name In Contact | Enable flag to use Zone level domain name in Contact header.
|
Use IP Signaling Peer Domain In Request URI | Enable flag to use IP Signaling Peer Domain in Request URI.
|
Use SIP Domain in PAIHeader | Enable this flag to set the value of host port of the PAI URI equivalent to the value of the SIP domain name, which is configured on the ingress trunk group of the Policy Exchange Server (PSX). The options are:
|
Make the required changes and click Save.