Use this object to configure Egress IP Attribute domain name behavior.

To View and Edit Domain Name

On the SBC main screen, choose a path:

  • Configuration > Profile Management > Category: Signaling Profiles > IP Signaling Profile > Egress IP Attributes > Domain Name
  • Configuration > System Provisioning > Category: Trunk Provisioning > IP Signaling Profile > Egress IP Attributes > Domain Name
  • All Profiles > Signaling > IP Signaling Profile > Egress IP Attributes > Domain Name

The Domain Name window is displayed. Select the IP Signaling Profile from the drop-down list.


The Edit Domain Name window is displayed.


Egress IP Attributes Domain Name Parameters:

Parameter

Description

Preserve Ingress From Domain Name
Note

This flag is only present the flag Use SIP Domain Name In From Field is enabled.

If a SIP domain is configured for the ingress trunk group and this flag is enabled, the default gateway associated with that SIP domain will be the originating gateway. Otherwise, the originating gateway will be the default gateway associated with the SIP domain associated with the Softswitch entity.

  • Disable (default)
  • Enable  

Preserve Ingress RURI Domain Name
Note

This flag is only present when the flag Use SIP Domain Name In Request URI is enabled.

When enabled, the ERE/SBC uses the domain name received in the Request-URI as destination domain name in outgoing SIP INVITE messages. Normally, outgoing SIP INVITE messages contain the trunk group domain assigned to egress trunk group.

  • Disable (default)
  • Enable  

Use Lower Case Domain Names
Note

This flag is only present when either of the following flags are enabled:

  • Use SIP Domain Name In From Field
  • Use SIP Domain Name In Request URI

Enable this flag to allow a lower case domain name for this IP Signaling Profile.

  • Disable (default)
  • Enable


Use SIP Domain Name In From Field
By default, the SBC uses its IP address as the host-port of the FROM URI in the outgoing INVITE message. Enable this flag to use the originating gateway information returned in the policy response as the host-port of the FROM URI in the outgoing INVITE message.
  • Disable (default)
  • Enable
Use SIP Domain Name In Request URI
 Use SIP Domain Name In Request URI Flag.
  • Disable (default) – SBC includes the IP address in the host-port portion of the Request-URI in outgoing SIP INVITE messages.
  • Enable – SBC includes the trunk group domain associated with egress trunk group as destination domain name in outgoing SIP INVITE messages.
Use Zone Level Domain Name In Contact Enable flag to use Zone level domain name in Contact header.
  • Disable (default) 
  • Enable
Use IP Signaling Peer Domain In Request URI Enable flag to use IP Signaling Peer Domain in Request URI.
  • Disable (default)
  • Enable

Use Zone Level Domain Name In Path Hdr Enable flag to use Zone level domain name in Path header.
  • Disable (default) 
  • Enable
Use SIP Domain in PAIHeader

Enable this flag to set the value of host port of the PAI URI equivalent to the value of the SIP domain name, which is configured on the ingress trunk group of the Policy Exchange Server (PSX). The options are:

  • Disable (default)
  • Enable

Make the required changes and click Save.


  • No labels