In this section:
Modified: for 6.2.1
This object is accessible only in SBC SWe and Cloud environments.
This section contains all the standard profiles and their fixed call-mix..
On the SBC main screen, go to System > Security >Swe Traffic Profiles. The Swe Traffic Profiles window is displayed.
SWe Traffic Profile
The parameters displayed are:
Swe Traffic Profile Parameters
Parameter | Description |
---|---|
Name | The SWe Active Profile Name.
|
Call Hold Time | Average Call Hold Time of the call load. |
Access Scenario | If true, deployment is in access scenario. |
Bhca Per Subscriber | BHCA per subscriber. |
Registration Interval | Registration Interval in seconds. |
NAT Enabled | The status of NAT configuration. |
Registration Refresh Interval | Refresh Interval in seconds. |
Direct Media Percent | The percentage of call load that is Direct Media. |
Transcode Percent | The percentage of call load that is transcoded call. |
Passthrough Codec Profile | The name of the pass-through codec profile. |
Transcoding Codec Profile | The name of the transcoding codec profile. |
Crypto Percent | The crypto percentage refers to the number of legs that are encrypted. |
Tone Percent | The number of legs that get tones treatment. |
Max VMbandwidth | The maximum VM bandwidth in Gbps. |
Processor Capability Index Override | If true, index overriding is disabled and the the value for the field Processor Capability Index Override Value can be entered. |
Processor Capability Index Override Value | The value of Processor Capability Index Override Value field. |