In this section:

Specifies the details about Configuration related to signaling quality measured by Post Gateway ringing delay (PGRD).

To View and Edit Pgrd

On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > QOE > Pgrd.

Select the desired Sip Cac Profile from the drop-down list to view its respective QOE - Pgrd parameters.

The Pgrd window is displayed.

Figure 1: Security Configuration - Sip Cac Profile - QOE - Pgrd

The following fields are displayed:

Table 1: Pgrd Parameters

Parameter

Description

Default Pgrd
Factor

Specifies the default value to be used as PGRD when no calls are made for a sampling period. The value range from 50 - 10000. The default value is 500.

Pgrd Critical
Limit

Specifies the critical PGRD limit, above which the call admission should be stopped. The value range from 50 - 10000. The default value is 2000.

Make the required changes and click Save at the right hand bottom of the panel to save the changes made.



  • No labels