In this section:
Specifies the details about Configuration related to signaling quality measured by Post Gateway ringing delay (PGRD).
To View and Edit Pgrd
On SBC main screen, go to Configuration > System Provisioning > Security Configuration > Sip Cac Profile > QOE > Pgrd.
Select the desired Sip Cac Profile from the drop-down list to view its respective QOE - Pgrd parameters.
The Pgrd window is displayed.
Figure 1: Security Configuration - Sip Cac Profile - QOE - Pgrd
The following fields are displayed:
Table 1: Pgrd Parameters
Parameter | Description |
---|---|
| Specifies the default value to be used as PGRD when no calls are made for a sampling period. The value range from 50 - 10000. The default value is 500. |
| Specifies the critical PGRD limit, above which the call admission should be stopped. The value range from 50 - 10000. The default value is 2000. |
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.