A sequence of Link attributes
Parameter Name | Required | Create | Read-Only | Data Type | Description |
---|---|---|---|---|---|
SLC | Yes | Yes | Yes | int32 | Signaling Link Code for this link. Value of 0-15 TL1Name: SLC |
Context | No | No | Yes | string | TL1Name: CONTEXT |
APC | No | No | Yes | string | Adjacent SS7 point code of this link. TL1Name: PC |
LinkName | No | No | Yes | string | Link Name based on the Linkset Name. TL1Name: LINK_NAME |
DREID | No | No | Yes | int32 | DRE to own this link. TL1Name: DRE_ID |
Cage | No | No | No | int32 | Cage used by this link TL1Name: CAGE |
Channel | No | No | No | int32 | Channel used by this link, valid values are 1 to 8 TL1Name: CHANNEL |
L2State | No | No | Yes | L2LinkState | Status of MTP Level 2 for this link. Deactivated, Proving, In-Service, Out of Service, Failed, Local Processor Outage, Remote Processor Outage, Both Processor Outage, Local Loopback mode, Not Enabled, Not Initialized TL1Name: L2_STATE |
L3State | No | No | Yes | L3LinkState | Status of MTP Level 3 for this link. Deactivated, Proving, In-Service, Out of Service, Locally Inhibited, Remotely Inhibited, Both Inhibited, Blocked, Blocked and Uninhibited, Local Processor Outage TL1Name: L3_STATE |
CongestionLevel | No | No | Yes | CongestionLevel | Congestion level of this link. For ANSI networks the values range from 1 to 3 or FALSE if not congested. For ITU networks the value is either TRUE or FALSE. TL1Name: CONGESTION_LVL |
RxMSUCount | No | No | Yes | int32 | Received MSU count, per second. TL1Name: RXMSU |
TxMSUCount | No | No | Yes | int32 | Transmitted MSU count, per second. TL1Name: TXMSU |
DiagnosticMessage | No | No | Yes | string | Link management diagnostic message TL1Name: DIAG_MSG |
Alarms | No | No | No | Feature | Alarms affect the alarms associated with the Link. DISABLED mode: Alarms will not be raised. ENABLED mode: Alarms will be raised. Valid values: ENABLED and DISABLED. Default value: ENABLED. TL1Name: ALARMS |
UserActivated | No | No | Yes | Feature | Link activation flag. Used on stack restart for alignment attempt. TL1Name: USR_ACTIVATED |
L2DebugLevel | No | No | No | int32 | MTP Level 2 Debug Level. The recommended value for this attribute is 0. TL1Name: L2_DBG_LVL |