Defines an M3UASCTPServer managed object.
Parameter Name | Required | Create | Read-Only | Data Type | Description |
---|---|---|---|---|---|
Slot | Yes | Yes | Yes | int32 | TL1Name: SLOT |
ServerID | Yes | No | Yes | int32 | TL1Name: ServerID |
IPAddress1 | No | Yes | No | string | TL1Name: IP1 |
IPAddress2 | No | Yes | No | string | TL1Name: IP2 |
Port | No | Yes | No | int32 | TL1Name: PORT |
Status | No | No | Yes | FeatureBoolean | TL1Name: STATUS |
ListenStatus | No | No | Yes | NetworkStatusInt | M3UA SCTP Server Listen Status. If Status is DISABLED, Listen Status must be set to 'DOWN'. If Status is ENABLED, Listen Status must be set to one of the following states: - 'DOWN': The server is not listening on any of the provided IP addresses due to a technical issue, e.g., the provided port is already in use, the provided IP addresses are not available or the provided hostnames are not resolvable. The alarm M3UASCTPServerDown indicating that the server is down must be raised. - 'STOPPED': The server is not listening on any of the provided IP addresses because it has been purposefully stopped by the application. This status means that the server has been 'UP' or 'PARTIALLY UP' and it has been purposefully brought down either because the ASP license max count has been reached or because SCTP system max capacity per routing slot has been reached. The alarm M3UASCTPServerDown indicating that the server is down must be raised. - 'UP': The server is listening on all the provided IP addresses - 'PARTIALLY UP': The server is listening on at least one, but not all, of the provided IP addresses. The alarm M3UASCTPServerAddrListMismatch, indicating a mismatch between the list of the provided IP addresses and the list of the listening IP addresses, must be raised. PARTIALLY UP is also an indication that the server was up but the hostname has been removed from the hosts file. In this case the Server Status will be PARTIALLY UP but will continue to listen until deactivated. TL1Name: ListenStatus |
DefaultSCTPValues | No | No | No | default_sctp_values | M3UA SCTP Server Listen Status. If Status is DISABLED, Listen Status must be set to 'DOWN'. If Status is ENABLED, Listen Status must be set to one of the following states: - 'DOWN': The server is not listening on any of the provided IP addresses due to a technical issue, e.g., the provided port is already in use, the provided IP addresses are not available or the provided hostnames are not resolvable. The alarm M3UASCTPServerDown indicating that the server is down must be raised. - 'STOPPED': The server is not listening on any of the provided IP addresses because it has been purposefully stopped by the application. This status means that the server has been 'UP' or 'PARTIALLY UP' and it has been purposefully brought down either because the ASP license max count has been reached or because SCTP system max capacity per routing slot has been reached. The alarm M3UASCTPServerDown indicating that the server is down must be raised. - 'UP': The server is listening on all the provided IP addresses - 'PARTIALLY UP': The server is listening on at least one, but not all, of the provided IP addresses. The alarm M3UASCTPServerAddrListMismatch, indicating a mismatch between the list of the provided IP addresses and the list of the listening IP addresses, must be raised. PARTIALLY UP is also an indication that the server was up but the hostname has been removed from the hosts file. In this case the Server Status will be PARTIALLY UP but will continue to listen until deactivated. TL1Name: USE DEFAULT |
Heartbeat | No | No | No | FeatureBoolean | Enable or disable the Heartbeat feature. SCTP Server must be de-activated and re-activated to take effect. TL1Name: HB |
HeartbeatInterval | No | No | No | int32 | Heartbeat interval (ms). SCTP Server must be de-activated and re-activated to take effect. TL1Name: HB_INTV |
RTOInitial | No | No | No | int32 | Initial Retransmission Timeout (ms). SCTP Server must be de-activated and re-activated to take effect. TL1Name: RTO_INIT |
RTOMinimum | No | No | No | int32 | Minimum Retransmission Timeout (ms). SCTP Server must be de-activated and re-activated to take effect. TL1Name: RTO_MIN |
RTOMaximum | No | No | No | int32 | Maximum Retransmission Timeout (ms). SCTP Server must be de-activated and re-activated to take effect. TL1Name: RTO_MAX |
MaximumInitRetrans | No | No | No | int32 | Maximum initial retransmissions. SCTP Server must be de-activated and re-activated to take effect. TL1Name: MAX_INIT_RETRANS |
MaximumAssocRetrans | No | No | No | int32 | Maximum association retransmissions. SCTP Server must be de-activated and re-activated to take effect. TL1Name: MAX_ASSOC_RETRANS |
MaximumPathRetrans | No | No | No | int32 | Maximum path retransmissions. SCTP Server must be de-activated and re-activated to take effect. TL1Name: MAX_PATH_RETRANS |
Bundling | No | No | No | FeatureBoolean | Enable or disable the Bundling feature. SCTP Server must be de-activated and re-activated to take effect. TL1Name: BUNDLING |
BundlingTimeout | No | No | No | int32 | Bundling timeout (msecs). SCTP Server must be de-activated and re-activated to take effect. TL1Name: BUNDLING_TO |
DelayedAckTimeout | No | No | No | int32 | Delayed acknowledgement timeout. SCTP Server must be de-activated and re-activated to take effect. TL1Name: DELAYACK_TO |
Checksum | No | No | Yes | SCTPCheckSum | Checksum algorithm. SCTP Server must be de-activated and re-activated to take effect. TL1Name: CHECKSUM |
InStreams | No | No | No | int32 | Number of in streams. SCTP Server must be de-activated and re-activated to take effect. TL1Name: INSTREAMS |
OutStreams | No | No | No | int32 | Number of out streams. SCTP Server must be de-activated and re-activated to take effect. TL1Name: OUTSTREAMS |