Sonus SBC 5XX0 V5.0.5R0 IOT CounterPath Bria Android SoftClient SIP Application Note

Document Overview

This document provides a configuration guide for Sonus SBC 5XX0 Series (Session Border Controller) when connecting to CounterPath Bria Android SoftClient.

This configuration guide supports features described on the CounterPath http://www.counterpath.com/bria/ website.

- For additional information on CounterPath Bria Android SoftClient, visit http://www.counterpath.com
- For additional information on Sonus SBC 5XXX, visit http://sonus.net

Introduction

The interoperability compliance testing focuses on verifying inbound and outbound calls flows between Sonus SBC 5XXX and CounterPath Bria Android SoftClient.

Audience

This is a technical document intended for telecommunications engineers with the purpose of configuring both the Sonus SBC and the third-party product. Navigating the third-party product as well as the Sonus SBC Command Line Interface (CLI) will be required. Understanding the basic concepts of TCP/UDP, IP/Routing, and SIP/RTP are also necessary to complete the configuration and any needed troubleshooting.

This configuration guide is offered as a convenience to Sonus customers. The specifications and information regarding the product in this guide are subject to change without notice. All statements, information, and recommendations in this guide are believed to be accurate, but are presented without warranty of any kind, express or implied, and are provided "AS IS." Users must take full responsibility for the application of the specifications and information in this guide.

Requirements

The following equipment and software were used for the sample configuration provided:

Requirements

	Equipment	Software Version
Sonus Networks	Sonus SBC 5200	V05.00.05-R000
	EMA	V05.00.05-R000
	SonusDB	V05.00.05-R000
	OS	V04.00.05-R000
	BIOS	V02.06.00
	BMC	V03.11.00
	Registrar (Sonus SBC 2000)	6.1.4build481
Third-party Equipment	CounterPath Bria Android Edition	Build 3.9.4.97204

Reference Configuration

The following reference configuration shows connectivity between CounterPath Bria Android SoftClient and Sonus SBC 5XXX.

Reference Configuration Topology

Support

For any questions regarding this document or the content herein, contact your maintenance and support provider.

Third-Party Product Features

The testing was executed with the CounterPath test plan. The following features were tested:

Basic Calls (Wired Ethernet Connection)
Advanced Calls, (Wired Ethernet Connection)
Basic Calls, Wireless Connectivity (Wireless Access Point)
Advanced Calls, Wireless Connectivity (Wireless Access Point)
Access Point Changes, Background Support
Call Log, MWI
Video Calling

Verify License

POL-BASE

CounterPath Bria SoftClient Configuration

The following new configurations are included in this section:

Account Settings
Network Traversal Strategy

1. Account Settings

Select Softphone > Settings

Settings

Select Accounts > Add Account

Accounts

Add SIP Account

Add Account Details

Select Accounts > Account Details > Account Advanced

Account Advanced

2. Network Traversal Strategy

Select Accounts > Account Details > Account Advanced > Network Traversal Strategy

Network Traversal Strategy

Sonus SBC 5xx0 Series Configuration

Complete Configuration

configure
#DSP Resources
set system mediaProfile compression 90 tone 10
commit
#Element Routing Priority profile
set profiles callRouting elementRoutingPriority TG_ERP entry localOperator 0 entityType trunkGroup
set profiles callRouting elementRoutingPriority TG_ERP entry nationalType 0 entityType trunkGroup
set profiles callRouting elementRoutingPriority TG_ERP entry internationalType 0 entityType trunkGroup
#IP Signaling profile
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes flags disableMediaLockDown enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes flags includeTransportTypeInContactHeader enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes flags endToEndBye enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes flags minimizeRelayingOfMediaChangesFromOtherCallLegAll enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes flags relayDataPathModeChangeFromOtherCallLeg enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes relayFlags updateWithoutSdp enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes transparencyFlags authcodeHeaders enable
set profiles signaling ipSignalingProfile ACCESS_IPSP egressIpAttributes flags disable2806Compliance enable
set profiles signaling ipSignalingProfile ACCESS_IPSP egressIpAttributes sipHeadersAndParameters flags endToEndAck enable
set profiles signaling ipSignalingProfile ACCESS_IPSP egressIpAttributes flags sameCallIdForRequiredAuthorization enable
set profiles signaling ipSignalingProfile ACCESS_IPSP egressIpAttributes privacy transparency enable
set profiles signaling ipSignalingProfile ACCESS_IPSP ingressIpAttributes flags sendSdpInSubsequent18x enable
set profiles signaling ipSignalingProfile ACCESS_IPSP ingressIpAttributes flags suppress183WithoutSdp enable
set profiles signaling ipSignalingProfile ACCESS_IPSP ingressIpAttributes flags suppress183For3xxRedirectResponse enable sendSdpIn200OkIf18xReliable enable
set profiles signaling ipSignalingProfile ACCESS_IPSP commonIpAttributes flags noPortNumber5060 enable
commit
set profiles signaling ipSignalingProfile APP_IPSP commonIpAttributes relayFlags dialogEventPackage enable info enable notify enable refer enable 
set profiles signaling ipSignalingProfile APP_IPSP egressIpAttributes flags disable2806Compliance enable
set profiles signaling ipSignalingProfile APP_IPSP egressIpAttributes privacy flags includePrivacy enable
commit
#Codecs
set profiles media codecEntry BRIA_G729AB_20ms codec g729ab packetSize 20 preferredRtpPayloadType 128
set profiles media codecEntry BRIA_G711_20ms codec g711 packetSize 20 law deriveFromOtherLeg
set profiles media codecEntry BRIA_G722_20ms codec g722 codingRate 64 packetSize 20 preferredRtpPayloadType 128
commit
#Packet Service Profile
set profiles media packetServiceProfile BRIA_PSP codec codecEntry1 BRIA_G722_20ms codecEntry2 BRIA_G711_20ms codecEntry3 BRIA_G729AB_20ms
set profiles media packetServiceProfile BRIA_PSP packetToPacketControl transcode conditional
set profiles media packetServiceProfile BRIA_PSP videoCalls maxVideoBandwith 5000 videoBandwidthReductionFactor 0 ipv4Tos 0 ipv6TrafficClass 0 ieee8021QVLanCos 0 audioOnlyIfVideoIsPrevented enable
commit
#Untrusted Side Configuration
set addressContext default ipInterfaceGroup UNTRUSTED ipInterface UNTRUSTED ceName SALINEA
set addressContext default ipInterfaceGroup UNTRUSTED ipInterface UNTRUSTED portName pkt2
set addressContext default ipInterfaceGroup UNTRUSTED ipInterface UNTRUSTED ipAddress 216.110.2.229
set addressContext default ipInterfaceGroup UNTRUSTED ipInterface UNTRUSTED prefix 26
set addressContext default ipInterfaceGroup UNTRUSTED ipInterface UNTRUSTED mode inService
set addressContext default ipInterfaceGroup UNTRUSTED ipInterface UNTRUSTED state enabled
commit
#IP Static Route
set addressContext default staticRoute 0.0.0.0 0 216.110.2.233 UNTRUSTED UNTRUSTED preference 100
commit
#zone
set addressContext default zone UNTRUSTED id 3
commit
#SIP signaling port
set addressContext default zone UNTRUSTED sipSigPort 3 ipInterfaceGroupName UNTRUSTED
set addressContext default zone UNTRUSTED sipSigPort 3 ipAddressV4 216.110.2.229
set addressContext default zone UNTRUSTED sipSigPort 3 portNumber 5060
set addressContext default zone UNTRUSTED sipSigPort 3 transportProtocolsAllowed sip-udp,sip-tcp
set addressContext default zone UNTRUSTED sipSigPort 3 mode inService
set addressContext default zone UNTRUSTED sipSigPort 3 state enabled
commit
#SIP trunk group
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE media mediaIpInterfaceGroupName UNTRUSTED mediaIpAddress 0.0.0.0 
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE services natTraversal signalingNat enabled mediaNat enabled learnNatForRtpOnly enabled 
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE signaling registration requireRegistration required 
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE ingressIpPrefix 0.0.0.0 0
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE policy media packetServiceProfile BRIA_PSP
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE policy signaling ipSignalingProfile ACCESS_IPSP
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE mode inService
set addressContext default zone UNTRUSTED sipTrunkGroup TWO-WAY-SIP-BRIAMOBILE state enabled 
commit
#Trusted Side Configuration
#IP Interface Group
set addressContext default ipInterfaceGroup TRUSTED ipInterface TRUSTED portName pkt0
set addressContext default ipInterfaceGroup TRUSTED ipInterface TRUSTED ipAddress 10.35.177.250
set addressContext default ipInterfaceGroup TRUSTED ipInterface TRUSTED prefix 26
set addressContext default ipInterfaceGroup TRUSTED ipInterface TRUSTED state enabled
commit
#IP Static Route
set addressContext default staticRoute 0.0.0.0 0 10.35.177.193 TRUSTED TRUSTED preference 100
commit
#zone
set addressContext default zone TRUSTED id 4
#SIP signaling port
set addressContext default zone TRUSTED sipSigPort 4 ipInterfaceGroupName TRUSTED
set addressContext default zone TRUSTED sipSigPort 4 ipAddressV4 10.35.177.251
set addressContext default zone TRUSTED sipSigPort 4 portNumber 5060
set addressContext default zone TRUSTED sipSigPort 4 transportProtocolsAllowed sip-udp,sip-tcp
set addressContext default zone TRUSTED sipSigPort 4 mode inService
set addressContext default zone TRUSTED sipSigPort 4 state enabled
commit
#IP Peer
set addressContext default zone TRUSTED ipPeer PSTN1 ipAddress 192.168.70.18 ipPort 0 defaultForIp false
set addressContext default zone TRUSTED ipPeer PSTN2 ipAddress 192.168.70.19 ipPort 0 defaultForIp false
set addressContext default zone TRUSTED ipPeer APPSERV ipAddress 10.35.177.232 ipPort 5060 defaultForIp false
commit
#SIP trunk groups
#PSTN trunks
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN1 policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN1 media mediaIpInterfaceGroupName TRUSTED
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN1 policy media packetServiceProfile BRIA_PSP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN1 ingressIpPrefix 192.168.70.18 32
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN1 mode inService
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN1 state enabled
commit
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN2 policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN2 media mediaIpInterfaceGroupName TRUSTED
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN2 policy media packetServiceProfile BRIA_PSP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN2 ingressIpPrefix 192.168.70.19 32
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN2 mode inService
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-PSTN2 state enabled
commit
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-APPSERV media mediaIpInterfaceGroupName TRUSTED 
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-APPSERV ingressIpPrefix 10.35.177.232 32
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-APPSERV policy callRouting elementRoutingPriority TG_ERP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-APPSERV policy media packetServiceProfile BRIA_PSP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-APPSERV policy signaling ipSignalingProfile APP_IPSP
set addressContext default zone TRUSTED sipTrunkGroup TWO-WAY-SIP-APPSERV state enabled mode inService
commit
#Global Configuration
#Route Labels
set global callRouting routingLabel TO_TWO_WAY_PSTN1 routingLabelRoute 0 trunkGroup TWO-WAY-SIP-PSTN1 ipPeer PSTN1 proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_PSTN2 routingLabelRoute 0 trunkGroup TWO-WAY-SIP-PSTN2 ipPeer PSTN2 proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_BRIAMOBILE routingLabelRoute 0 trunkGroup TWO-WAY-SIP-BRIAMOBILE proportion 0 cost 1000000 inService inService testing normal
set global callRouting routingLabel TO_TWO_WAY_APPSERV routingLabelRoute 0 trunkGroup TWO-WAY-SIP-APPSERV ipPeer APPSERV proportion 0 cost 1000000 inService inService testing normal
commit
#Routes
set global callRouting route trunkGroup TWO-WAY-SIP-BRIAMOBILE SALINE standard Sonus_NULL Sonus_NULL all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_APPSERV
set global callRouting route trunkGroup TWO-WAY-SIP-BRIAMOBILE SALINE standard 2144326888 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_PSTN1
set global callRouting route trunkGroup TWO-WAY-SIP-BRIAMOBILE SALINE standard 2144326894 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_PSTN2
set global callRouting route trunkGroup TWO-WAY-SIP-APPSERV SALINE standard 222111 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_BRIAMOBILE
set global callRouting route trunkGroup TWO-WAY-SIP-PSTN1 SALINE standard 2144326894 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_PSTN2
set global callRouting route trunkGroup TWO-WAY-SIP-PSTN2 SALINE standard 2144326888 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_PSTN1
set global callRouting route trunkGroup TWO-WAY-SIP-PSTN1 SALINE standard 222111 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_APPSERV
set global callRouting route trunkGroup TWO-WAY-SIP-PSTN2 SALINE standard 222111 1 all all ALL none Sonus_NULL routingLabel TO_TWO_WAY_APPSERV
commit
exit

Test Results

Test Results

TCID	Test Case Name	Expected Results	Result
Section 1 - Basic Calls (Wired Ethernet Connection)
1.01	Bria outbound call to VoIP endpoint	Call established, two-way audio.	Pass
1.02	Bria Inbound Call from VoIP endpoint	Call established, two-way audio.	Pass
1.03	Bria outbound call to PSTN number	Call established, two-way audio.	Pass
1.04	Bria Inbound Call from PSTN number	Call established, two-way audio.	Pass
1.05	Extended call with VoIP endpoint	Confirm call does not drop and 2-way audio maintained for duration of call	Pass
1.06	Extended call with PSTN endpoint	Confirm call does not drop and 2-way audio maintained for duration of call	Pass
1.07	Internal HOLD	Text seen: Call on Hold. Play Button appears (to allow for resuming call) and call is on Hold, no audio between call participants	Pass
1.08	Internal Retrieve HOLD	Text Seen: Call Established. Play button removed, pause button and other audio options available , voicepath resumed	Pass
1.09	External HOLD	Text seen: Call on Hold. Play Button appears(to allow for resuming call) and call is on Hold, no audio between call participants	Pass
1.10	External Retrieve HOLD	Text Seen: Call Established. Play button removed, pause button and other audio options available, voicepath resumed	Pass
Section 2 - Advanced Calls, (Wired Ethernet Connection)
2.01	Bria Hold internal then call internal	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
2.02	Bria Swap Internal	Call is swapped to first call (call with end B) with two way speech path and second call (with end C) goes on hold	Pass
2.03	Bria Hold external then call external	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
2.04	Bria Swap External	Call is swapped to first call (call with end B) with two way speech path and second call (with end C) goes on hold	Pass
2.05	Bria Hold internal then call external	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
2.06	Bria Hold external then call internal	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
2.07	Bria Swap Mixed	Call is swapped to first call (call with end B) with two way speech path and second call (with end C) goes on hold (with play button show)	Pass
2.08	Bria Swap End first call	Call with end B is terminated properly and call with C is retrieved from Hold with two way speech path.	Pass
2.09	Bria Second call attempt cancelled	First call (call with End B) resumes when we end the second call attempt	Pass
2.10	Bria Blind Transfer	B gets transferred to C. Two way speech path established between end B and end C.	Pass
2.11	Bria Supervised Transfer	Bria Supervised Transfer	Pass
2.12	Bria Conference	Conference call established successfully between Bria VOIP, end B and end C.	Pass
2.13	Bria Split Conference	Conference split successfully resulting in independent calls with B and C, allowing swap.	Pass
2.14	Bria Conference Hold	conference call goes on hold successfully, no audio between participants	Pass
2.15	Bria Conference Retrieve Hold	conference call comes off hold successfully, audio restored between participants	Pass
2.16	Receive incoming call (internal) while in active call	Confirm can answer and swap between active calls as expected	Pass
2.17	Receive incoming call (external) while in active call	Confirm can answer and swap between active calls as expected	Pass
Section 3 - Basic Calls, Wireless Connectivity (Wireless Access Point)
3.01	Bria outbound call to VoIP endpoint	Call established, two-way audio.	Pass
3.02	Bria Inbound Call from VoIP endpoint	Call established, two-way audio.	Pass
3.03	Bria outbound call to PSTN number	Call established, two-way audio.	Pass
3.04	Bria Inbound Call from PSTN number	Call established, two-way audio.	Pass
3.05	Extended call with VoIP endpoint	Confirm call does not drop and 2-way audio maintained for duration of call	Pass
3.06	Extended call with PSTN endpoint	Confirm call does not drop and 2-way audio maintained for duration of call	Pass
3.07	Internal HOLD	Text seen: Call on Hold. Play Button appears (to allow for resuming call) and call is on Hold, no audio between call participants	Pass
3.08	Internal Retreive HOLD	Text Seen: Call Established. Play button removed, pause button and other audio options available , voicepath resumed	Pass
3.09	External HOLD	Text seen: Call on Hold. Play Button appears(to allow for resuming call) and call is on Hold, no audio between call participants	Pass
3.10	External Retrieve HOLD	Text Seen: Call Established. Play button removed, pause button and other audio options available, voicepath resumed	Pass
Section 4 - Advanced Calls, Wireless Connectivity( Wireless Access Point)
4.01	Bria Hold internal then call internal	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
4.02	Bria Swap Internal	Call is swapped to first call (call with end B) with two way speech path and second call (with end C) goes on hold	Pass
4.03	Bria Hold external then call external	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
4.04	Bria Swap External	Call is swapped to first call (call with end B) with two way speech path and second call (with end C) goes on hold	Pass
4.05	Bria Hold internal then call external	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
4.06	Bria Hold external then call internal	First call goes on hold, second call established. Internal B is on hold (with play button show) Two-way audio with C.	Pass
4.07	Bria Swap Mixed	Call is swapped to first call (call with end B) with two way speech path and second call (with end C) goes on hold (with play button show)	Pass
4.08	Bria Swap End first call	Call with end B is terminated properly and call with C is retrieved from Hold with two way speech path.	Pass
4.09	Bria Second call attempt cancelled	First call (call with End B) resumes when we end the second call attempt	Pass
4.10	Bria Blind Transfer	B gets transferred to C. Two way speech path established between end B and end C.	Pass
4.11	Bria Supervised Transfer	A establishes call with B. B gets placed on hold while call with C is established. Call is transferred successfully and two way speech path established successfully between end B and end C.	Pass
4.12	Bria Conference	Conference call established successfully between Bria VOIP, end B and end C.	Pass
4.13	Bria Split Conference	Conference split successfully resulting in independent calls with B and C, allowing swap.	Pass
4.14	Bria Conference Hold	conference call goes on hold successfully, no audio between participants	Pass
4.15	Bria Conference Retrieve Hold	conference call comes off hold successfully, audio restored between participants	Pass
4.16	Receive incoming call (internal) while in active call	Confirm can answer and swap between active calls as expected	Pass
4.17	Receive incoming call (external) while in active call	Confirm can answer and swap between active calls as expected	Pass
Section 5 - Access Point Changes, Background Support
5.01	Switch from Wired only to Wi-Fi	Bria should maintain registration and ability to make and receive calls with 2-way audio.	Pass
5.02	Switch from Wired only to Wi-Fi only	Bria should stay registered and be able to make and receive calls with 2-way audio.	Pass
5.03	Switch from Wifi to Wired	Bria should maintain registration and ability to make and receive calls with 2-way audio.	Pass
5.04	Switch from Wireless only to Wired only	Bria should re-register and be able to make and receive calls with 2-way audio.	Pass
5.05	Background support, incoming call short	Bria should maintain registration and ability to receive calls with 2-way audio.	Pass
5.06	Background support, incoming call long	Background support, incoming call long	Pass
5.07	Background support, outgoing call	Bria should maintain registration and ability to make and receive calls with 2-way audio.	Pass
Section 6 - Call Log, MWI (Advanced Voice Features)
6.01	Bria Call Log: display correct logs for outgoing calls	Outgoing call logs displayed properly with correct name, number and icon	Pass
6.02	Bria Call Log: display correct logs for incoming calls	Incoming call logs displayed properly with correct name, number and icon	Pass
6.03	Bria MWI On	Verify new Message Waiting Indicator is displayed on Bria (VM icon highlighted and number of VM indicated)	N/A
6.04	Bria Retrieve Voicemail	DTMF is sent/received allowing retrieval of voicemail	N/A
6.05	Bria Voice mail MWI Persist on register/unregister	MWI should persist between unregister/register or Exit and re-launch of Bria VOIP Client.	N/A
6.06	Bria New MWI Increment	MWI counter on dash board should increase by 1 after leaving new message to Bria voice mail.	N/A
6.07	Bria MWI Decrement	MWI counter on dash board should decrease by 1 after message is deleted	N/A
6.08	Bria MWI Off	Verify MWI turned off after all VM are retrieved by Bria	N/A
Section 7 - Video Calling(Advanced Feature) (video codec enabled via SIP)
7.01	Bria outbound video call to VoIP endpoint	Call established, two-way audio, two-way video	Pass
7.02	Bria Inbound Video Call from VoIP endpoint	Call established, two-way audio, two-way video	Pass
7.03	Bria outbound escalation from audio call to video call	Call established, two-way audio, two-way video	Pass
7.04	Bria Inbound escalation from audio call to video call	Call established, two-way audio, two-way video	Pass
7.05	Extended video call with VoIP endpoint	Confirm video call does not drop and 2-way audio and 2-way video maintained for duration of call	Pass
7.06	Internal HOLD	Play/Resume button presented and call is on Hold, no audio or video between call participants	Pass
7.07	Internal Retrieve HOLD	hold button presented back, voice and video paths resumed	Pass
Section 8 - Messaging & Presence (Advanced Feature) (requires XMPP account)
8.01	Change Presence Status	Confirm status change updates other clients	N/A
8.02	Receive Presence Status	Confirm other clients status is updated on Bria	N/A
8.03	Send IM	Message created, sent and received	N/A
8.04	Messaging Activity	Confirm other party's messaging response activity is detected in Bria	N/A
8.05	Receive IM	Message received.	N/A
8.06	Group Chat	Group chat created, message sent and message received	N/A

Conclusion

These Application Notes describe the configuration steps required for Sonus SBC 5XXX to successfully interoperate with CounterPath Bria Android SoftClient. All feature and serviceability test cases were completed and passed with the exceptions/observations noted in Test Results.

Page tree

Table of Contents