You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

The Node-Level SIP Settings feature enables SIP options to be configured that apply to the SBC 1000/2000 at the node-level. These items include the following:

  • Call Admission Control. Provides SIP level call admission control by regulating call attempts.
  • Source IP Untrusted Alarm. Sets alarm  when an Invite is received from for an untrusted source.
  • Skype/Lync Third Party Presence.  Enables the SBC 1000/2000 to pass a non-Skype/Lync device's presence information to a Skype/Lync presence server on behalf of an existing Skype/Lync client.
  • Skype/Lync Edge Server. When a Lync Edge Server is configured, SIP receives notice and create a signaling group that handles all Service Sessions for the SBC.

Configure SIP Settings

To configure SIP Settings:

  1. In the WebUI, click the Settings tab.

  2. In the left navigation pane, go to SIP > Node-level SIP Settings.

  3. Configure the options.

     

  4. Click Apply.

SIP Settings Dialog Example

 

Node-Level SIP Settings - Field Definitions

CAC Admin State

A Call Admission Profile provides SIP level call admission control by regulating call attempts per second, and the rate of new invite/non-invite sessions. Once the SBC limits are met, SIP will no longer accept/issue new invite or non-invite sessions (except 911 calls). This feature protects the SBC from overload conditions (an overload condition is detected if the average rate of invite and non-invite sessions exceeds the pre-determined limit or the CPU threshold is exceeded). It also prevents internal/external DOS attacks in an otherwise normal network using overload detection and resource leaks/malfunction detection.

When rejecting calls or sessions on account of admission-control, SBC sends "480 Temporarily Unavailable" response to the peers.

Options: Enable (default; enables SIP level call admission control) or Disable (disables SIP level call admission control.

Alarm for Untrusted Invite

Enables the "SIP Request From Untrusted IP" alarm to be sent when the SBC receives an INVITE message from an untrusted IP source.  Options: Enable (alarm is sent); Disable (alarm is not sent). For more information on alarms, see Alarms and Events Reference.

Presence Destination

Determines the server to which a Publish message is sent containing the presence information. This server is defined in a SIP Server Table. Only servers whose protocol is TLS are available in the Presence Destination list box.

Presence Service Status

A run-time status that displays the current state of the server. Valid states are:

  • Down: Either an alarm has been raised due to Publish failures, or the server has failed.
  • Idle: The server status is unknown, it may be up or down.
  • Up: The server has been configured and is running, and one or more Publish sessions have been successful.

Publish Session Count

Displays the number of currently active Publish sessions.

Edge Server Destination

Specifies the Edge server where service message  is sent to gather TURN server security tokens for SBC Edge to act as an ICE call agent. Only the servers whose protocol is TLS are available in the Edge Server Destination list box.

This server is defined in a SIP Server Table

Edge Server Token Duration

Specifies the number of minutes for which the security token needs to be valid.

  • No labels