This section describes the initial tasks to configure the Ribbon DSC Platform system.
Perform the tasks in this section in the same sequence as they are presented; otherwise, the DSC Platform may not perform as expected.
Note
All procedures in this section must be performed using the Menu UI.
Workflow
Step | Action |
---|---|
1 | |
2 | |
3 | |
4 | Configuring the Network Management Interfaces for IPv4 or IPv6 |
5 | Configuring the IP Routing Traffic Interfaces with the Web UI |
6 | Executing the Initial Configuration |
7 | Optional. If PCE is in use on this system, refer to Configure pce_1 and pce_2. |
Overview
Content Tools