In this section:
Use this object to set up to four transport parameter types
To View and Edit Transport
On SBC main screen, go to Configuration > System Provisioning > Category: Trunk Provisioning > Ip Signaling Profile > Egress Ip Attributes > Transport. The Transport window is displayed.
On the Transport window, choose the Ip Signaling Profile as DEFAULT_H323 to view the Transport for H323 Trunk Group.
Figure 1: Trunk Provisioning - Egress Ip Attributes H323 Transport
There are no Transport parameters for DEFAULT_H323 type of Egress Ip Attributes.
DEFAULT_SIP
On the Transport window, choose the Ip Signaling Profile as DEFAULT_SIP to view the Transport for SIP Trunk Group.
Figure 2: Trunk Provisioning - Egress Ip Attributes SIP Transport
The following fields are displayed:
Table 1: Egress Ip Attributes Transport Parameters
Parameter | Description |
|---|---|
Type1 | Transport parameter type1. The options are:
|
Type2 | Transport parameter type2. The options are:
|
Type3 | Transport parameter type3. The options are:
|
Type4 | Transport parameter type4. The options are:
|
Make the required changes and click Save at the right hand bottom of the panel to save the changes made.
Overview
Content Tools