In this section:
This section details the SLWRESD profile which uses ENUM zones configured for sending ENUM queries against an enumDomainLabel
(and receives responses) using either the management or signaling interfaces, depending upon the LWRESD Profile type
setting.
Command Syntax
% set global servers lwresdProfile <profile name> addrressContext <addressContext name> description <description> eDnsGlobalBufferSize <512-4096> eDnsMonitorInterval <60-180> enableLwresdLog <disable | enable> enumArsProfileId <enumArsProfile name> enumDomainNameLabel <ENUM domain name label> ipInterfaceGroup <ipInterfaceGroup name> type <ip | mgmt | signalingIp>
Command Parameters
LWRESD Profile Parameters
Parameter | Length/Range | Description |
---|---|---|
Initial set of Parameters: | ||
lwresdProfile | 1-23 characters |
NOTE: Only one |
description | 1-255 characters |
|
eDnsGlobalBufferSize | 512-4,096 | The OPT record uses this value when the eDNSType flag is set to yes and the eDNSBufferSize is configured as . (Default: 4,096) |
eDnsMonitorInterval | 60-180 | If this parameter is configured and the eDNSType flag is set to yes , the ERE does not send the eDNS query for this configured interval value after a DNS server sends an eDNS failure response. During this interval value, the ERE instead sends the DNS query. (Default: 120) |
enableLwresdLog | N/A | Use this flag to enable/disable LWRESD logging.
|
enumArsProfileId | N/A |
|
enumDomainNameLabel | N/A | <ENUM domain name label> – Use this parameter to associate the lwresdProfile with a particular enumDomainNameLabel . |
type | N/A | Use this parameter to specify the interface type supported by the external DNS server.
|
Additional Parameters: | ||
addressContext | N/A | Select the Address Context for IP Interface Group you want to use. NOTE: This parameter is available with |
ipInterfaceGroup | N/A | Select the IP Interface Group to use for sending ENUM queries. NOTE: This parameter is available with |
ipInterfaceGroupName | N/A | Select the IP Interface Group used to communicate with the policy server. NOTE: This parameter is available with |
sipSigPort | N/A | Select the SIP signaling port to that specifies the IP address to use for sending ENUM queries. The signaling interface uses port 988 to send and receive the queries. NOTE: This parameter is available with |
zone | N/A | Select the Zone for the IP Interface Group you want to use. NOTE: This parameter is available with |