Note
The following section is only applicable to the DSC 8000, the DSC SWe (on MA-RMS), the Signaling Platform 2000 (SP2000), and the virtual SP2000 (on MA-RMS).
You can manually set and clear a local processor outage (LPO), inhibit and uninhibit a Low-speed Link.
Caution
Setting LPO and inhibiting a Low-speed Link should be done with care, because performing these actions may reduce the capacity of a linkset.
To set LPO, clear LPO, inhibit, or uninhibit a Low-speed Link
- From the Main Menu, click MTP3.
- Click the required NA.
- Click Linksets.
- Click the required linkset.
- Click the required LS Link.
- Click Set LPO | Clear LPO | Inhibit | Un-inhibit.
- Click Continue.
Overview
Content Tools