Note

The following section is only applicable to the DSC 8000, the DSC SWe (on MA-RMS), the Signaling Platform 2000 (SP2000), and the virtual SP2000 (on MA-RMS).

You can manually set and clear a local processor outage (LPO), inhibit and uninhibit a Low-speed Link.

Caution

Setting LPO and inhibiting a Low-speed Link should be done with care, because performing these actions may reduce the capacity of a linkset.

  1. From the Main Menu, click MTP3.

  2. Click the required NA.

  3. Click Linksets.

  4. Click the required linkset.

  5. Click the required LS Link.

  6. Click Set LPO | Clear LPO | Inhibit | Un-inhibit.

  7. Click Continue.

  • No labels